Filtered by vendor Linksys
Subscribe
Total
97 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2024-1406 | 1 Linksys | 2 Wrt54gl, Wrt54gl Firmware | 2024-05-17 | 3.3 LOW | 4.3 MEDIUM |
| A vulnerability was found in Linksys WRT54GL 4.30.18. It has been declared as problematic. This vulnerability affects unknown code of the file /SysInfo1.htm of the component Web Management Interface. The manipulation leads to information disclosure. The exploit has been disclosed to the public and may be used. VDB-253330 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. | |||||
| CVE-2024-1405 | 1 Linksys | 2 Wrt54gl, Wrt54gl Firmware | 2024-05-17 | 3.3 LOW | 4.3 MEDIUM |
| A vulnerability was found in Linksys WRT54GL 4.30.18. It has been classified as problematic. This affects an unknown part of the file /wlaninfo.htm of the component Web Management Interface. The manipulation leads to information disclosure. The exploit has been disclosed to the public and may be used. The identifier VDB-253329 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. | |||||
| CVE-2024-1404 | 1 Linksys | 2 Wrt54gl, Wrt54gl Firmware | 2024-05-17 | 3.3 LOW | 7.5 HIGH |
| A vulnerability was found in Linksys WRT54GL 4.30.18 and classified as problematic. Affected by this issue is some unknown functionality of the file /SysInfo.htm of the component Web Management Interface. The manipulation leads to information disclosure. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-253328. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. | |||||
| CVE-2006-2559 | 1 Linksys | 2 Wrt54g, Wrt54g V5 | 2024-02-14 | 7.5 HIGH | N/A |
| Linksys WRT54G Wireless-G Broadband Router allows remote attackers to bypass access restrictions and conduct unauthorized operations via a UPnP request with a modified InternalClient parameter, which is not validated, as demonstrated by using AddPortMapping to forward arbitrary traffic. | |||||
| CVE-2010-1573 | 1 Linksys | 2 Wap54g, Wap54g Firmware | 2024-02-13 | 10.0 HIGH | 9.8 CRITICAL |
| Linksys WAP54Gv3 firmware 3.04.03 and earlier uses a hard-coded username (Gemtek) and password (gemtekswd) for a debug interface for certain web pages, which allows remote attackers to execute arbitrary commands via the (1) data1, (2) data2, or (3) data3 parameters to (a) Debug_command_page.asp and (b) debug.cgi. | |||||
| CVE-2004-0580 | 1 Linksys | 12 Befcmu10, Befn2ps4, Befsr11 and 9 more | 2023-11-07 | 5.0 MEDIUM | N/A |
| DHCP on Linksys BEFSR11, BEFSR41, BEFSR81, and BEFSRU31 Cable/DSL Routers, firmware version 1.45.7, does not properly clear previously used buffer contents in a BOOTP reply packet, which allows remote attackers to obtain sensitive information. | |||||
| CVE-2022-35572 | 1 Linksys | 2 E5350, E5350 Firmware | 2023-08-08 | N/A | 7.5 HIGH |
| On Linksys E5350 WiFi Router with firmware version 1.0.00.037 and lower, (and potentially other vendors/devices due to code reuse), the /SysInfo.htm URI does not require a session ID. This web page calls a show_sysinfo function which retrieves WPA passwords, SSIDs, MAC Addresses, serial numbers, WPS Pins, and hardware/firmware versions, and prints this information into the web page. This web page is visible when remote management is enabled. A user who has access to the web interface of the device can extract these secrets. If the device has remote management enabled and is connected directly to the internet, this vulnerability is exploitable over the internet without interaction. | |||||
| CVE-2023-31741 | 1 Linksys | 2 E2000, E2000 Firmware | 2023-05-31 | N/A | 7.2 HIGH |
| There is a command injection vulnerability in the Linksys E2000 router with firmware version 1.0.06. If an attacker gains web management privileges, they can inject commands into the post request parameters wl_ssid, wl_ant, wl_rate, WL_atten_ctl, ttcp_num, ttcp_size in the httpd s Start_EPI() function, thereby gaining shell privileges. | |||||
| CVE-2023-31740 | 1 Linksys | 2 E2000, E2000 Firmware | 2023-05-30 | N/A | 7.2 HIGH |
| There is a command injection vulnerability in the Linksys E2000 router with firmware version 1.0.06. If an attacker gains web management privileges, they can inject commands into the post request parameters WL_atten_bb, WL_atten_radio, and WL_atten_ctl in the apply.cgi interface, thereby gaining shell privileges. | |||||
| CVE-2023-31742 | 1 Linksys | 2 Wrt54gl, Wrt54gl Firmware | 2023-05-30 | N/A | 7.2 HIGH |
| There is a command injection vulnerability in the Linksys WRT54GL router with firmware version 4.30.18.006. If an attacker gains web management privileges, they can inject commands into the post request parameters wl_ant, wl_rate, WL_atten_ctl, ttcp_num, ttcp_size in the httpd s Start_EPI() function, thereby gaining shell privileges. | |||||
| CVE-2018-3953 | 1 Linksys | 4 E1200, E1200 Firmware, E2500 and 1 more | 2023-04-26 | 9.0 HIGH | 7.2 HIGH |
| Devices in the Linksys ESeries line of routers (Linksys E1200 Firmware Version 2.0.09 and Linksys E2500 Firmware Version 3.0.04) are susceptible to OS command injection vulnerabilities due to improper filtering of data passed to and retrieved from NVRAM. Data entered into the 'Router Name' input field through the web portal is submitted to apply.cgi as the value to the 'machine_name' POST parameter. When the 'preinit' binary receives the SIGHUP signal, it enters a code path that continues until it reaches offset 0x0042B5C4 in the 'start_lltd' function. Within the 'start_lltd' function, a 'nvram_get' call is used to obtain the value of the user-controlled 'machine_name' NVRAM entry. This value is then entered directly into a command intended to write the host name to a file and subsequently executed. | |||||
| CVE-2018-3955 | 1 Linksys | 4 E1200, E1200 Firmware, E2500 and 1 more | 2023-04-26 | 9.0 HIGH | 7.2 HIGH |
| An exploitable operating system command injection exists in the Linksys ESeries line of routers (Linksys E1200 Firmware Version 2.0.09 and Linksys E2500 Firmware Version 3.0.04). Specially crafted entries to network configuration information can cause execution of arbitrary system commands, resulting in full control of the device. An attacker can send an authenticated HTTP request to trigger this vulnerability. Data entered into the 'Domain Name' input field through the web portal is submitted to apply.cgi as the value to the 'wan_domain' POST parameter. The wan_domain data goes through the nvram_set process described above. When the 'preinit' binary receives the SIGHUP signal it enters a code path that calls a function named 'set_host_domain_name' from its libshared.so shared object. | |||||
| CVE-2018-3954 | 1 Linksys | 4 E1200, E1200 Firmware, E2500 and 1 more | 2023-04-26 | 9.0 HIGH | 7.2 HIGH |
| Devices in the Linksys ESeries line of routers (Linksys E1200 Firmware Version 2.0.09 and Linksys E2500 Firmware Version 3.0.04) are susceptible to OS command injection vulnerabilities due to improper filtering of data passed to and retrieved from NVRAMData entered into the 'Router Name' input field through the web portal is submitted to apply.cgi as the value to the 'machine_name' POST parameter. When the 'preinit' binary receives the SIGHUP signal it enters a code path that calls a function named 'set_host_domain_name' from its libshared.so shared object. | |||||
| CVE-2022-38841 | 1 Linksys | 2 E8450, E8450 Firmware | 2023-04-21 | N/A | 8.8 HIGH |
| Linksys AX3200 1.1.00 is vulnerable to OS command injection by authenticated users via shell metacharacters to the diagnostics traceroute page. | |||||
| CVE-2022-43972 | 1 Linksys | 2 Wrt54gl, Wrt54gl Firmware | 2023-01-13 | N/A | 7.5 HIGH |
| A null pointer dereference vulnerability exists in Linksys WRT54GL Wireless-G Broadband Router with firmware <= 4.30.18.006. A null pointer dereference in the soap_action function within the upnp binary can be triggered by an unauthenticated attacker via a malicious POST request invoking the AddPortMapping action. | |||||
| CVE-2022-43971 | 1 Linksys | 2 Wumc710, Wumc710 Firmware | 2023-01-13 | N/A | 7.2 HIGH |
| An arbitrary code exection vulnerability exists in Linksys WUMC710 Wireless-AC Universal Media Connector with firmware <= 1.0.02 (build3). The do_setNTP function within the httpd binary uses unvalidated user input in the construction of a system command. An authenticated attacker with administrator privileges can leverage this vulnerability over the network via a malicious GET or POST request to /setNTP.cgi to execute arbitrary commands on the underlying Linux operating system as root. | |||||
| CVE-2022-43973 | 1 Linksys | 2 Wrt54gl, Wrt54gl Firmware | 2023-01-13 | N/A | 7.2 HIGH |
| An arbitrary code execution vulnerability exisits in Linksys WRT54GL Wireless-G Broadband Router with firmware <= 4.30.18.006. The Check_TSSI function within the httpd binary uses unvalidated user input in the construction of a system command. An authenticated attacker with administrator privileges can leverage this vulnerability over the network via a malicious POST request to /apply.cgi to execute arbitrary commands on the underlying Linux operating system as root. | |||||
| CVE-2022-43970 | 1 Linksys | 2 Wrt54gl, Wrt54gl Firmware | 2023-01-13 | N/A | 7.2 HIGH |
| A buffer overflow vulnerability exists in Linksys WRT54GL Wireless-G Broadband Router with firmware <= 4.30.18.006. A stack-based buffer overflow in the Start_EPI function within the httpd binary allows an authenticated attacker with administrator privileges to execute arbitrary commands on the underlying Linux operating system as root. This vulnerablity can be triggered over the network via a malicious POST request to /apply.cgi. | |||||
| CVE-2022-38555 | 1 Linksys | 2 E1200, E1200 Firmware | 2022-09-01 | N/A | 9.8 CRITICAL |
| Linksys E1200 v1.0.04 is vulnerable to Buffer Overflow via ej_get_web_page_name. | |||||
| CVE-2022-38132 | 1 Linksys | 2 Mr8300, Mr8300 Firmware | 2022-08-29 | N/A | 8.8 HIGH |
| Command injection vulnerability in Linksys MR8300 router while Registration to DDNS Service. By specifying username and password, an attacker connected to the router's web interface can execute arbitrary OS commands. The username and password fields are not sanitized correctly and are used as URL construction arguments, allowing URL redirection to an arbitrary server, downloading an arbitrary script file, and eventually executing the file in the device. This issue affects: Linksys MR8300 Router 1.0. | |||||