Filtered by vendor Siemens
Subscribe
Total
1761 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2019-19923 | 8 Debian, Netapp, Opensuse and 5 more | 12 Debian Linux, Cloud Backup, Backports Sle and 9 more | 2022-04-15 | 5.0 MEDIUM | 7.5 HIGH |
| flattenSubquery in select.c in SQLite 3.30.1 mishandles certain uses of SELECT DISTINCT involving a LEFT JOIN in which the right-hand side is a view. This can cause a NULL pointer dereference (or incorrect results). | |||||
| CVE-2019-19926 | 8 Debian, Netapp, Opensuse and 5 more | 12 Debian Linux, Cloud Backup, Backports Sle and 9 more | 2022-04-15 | 5.0 MEDIUM | 7.5 HIGH |
| multiSelect in select.c in SQLite 3.30.1 mishandles certain errors during parsing, as demonstrated by errors from sqlite3WindowRewrite() calls. NOTE: this vulnerability exists because of an incomplete fix for CVE-2019-19880. | |||||
| CVE-2019-19880 | 8 Debian, Netapp, Opensuse and 5 more | 12 Debian Linux, Cloud Backup, Backports Sle and 9 more | 2022-04-15 | 5.0 MEDIUM | 7.5 HIGH |
| exprListAppendList in window.c in SQLite 3.30.1 allows attackers to trigger an invalid pointer dereference because constant integer values in ORDER BY clauses of window definitions are mishandled. | |||||
| CVE-2019-19646 | 5 Netapp, Oracle, Siemens and 2 more | 6 Cloud Backup, Ontap Select Deploy Administration Utility, Mysql Workbench and 3 more | 2022-04-15 | 7.5 HIGH | 9.8 CRITICAL |
| pragma.c in SQLite through 3.30.1 mishandles NOT NULL in an integrity_check PRAGMA command in certain cases of generated columns. | |||||
| CVE-2019-19645 | 5 Netapp, Oracle, Siemens and 2 more | 6 Cloud Backup, Ontap Select Deploy Administration Utility, Mysql Workbench and 3 more | 2022-04-15 | 2.1 LOW | 5.5 MEDIUM |
| alter.c in SQLite through 3.30.1 allows attackers to trigger infinite recursion via certain types of self-referential views in conjunction with ALTER TABLE statements. | |||||
| CVE-2019-19317 | 4 Netapp, Oracle, Siemens and 1 more | 5 Cloud Backup, Ontap Select Deploy Administration Utility, Mysql Workbench and 2 more | 2022-04-15 | 7.5 HIGH | 9.8 CRITICAL |
| lookupName in resolve.c in SQLite 3.30.1 omits bits from the colUsed bitmask in the case of a generated column, which allows attackers to cause a denial of service or possibly have unspecified other impact. | |||||
| CVE-2019-19244 | 4 Canonical, Oracle, Siemens and 1 more | 4 Ubuntu Linux, Mysql Workbench, Sinec Infrastructure Network Services and 1 more | 2022-04-15 | 5.0 MEDIUM | 7.5 HIGH |
| sqlite3Select in select.c in SQLite 3.30.1 allows a crash if a sub-select uses both DISTINCT and window functions, and also has certain ORDER BY usage. | |||||
| CVE-2021-31784 | 2 Opendesign, Siemens | 2 Drawings Sdk, Comos | 2022-04-15 | 6.8 MEDIUM | 7.8 HIGH |
| An out-of-bounds write vulnerability exists in the file-reading procedure in Open Design Alliance Drawings SDK before 2021.6 on all supported by ODA platforms in static configuration. This can allow attackers to cause a crash, potentially enabling a denial of service attack (Crash, Exit, or Restart) or possible code execution. | |||||
| CVE-2021-32946 | 2 Opendesign, Siemens | 4 Drawings Sdk, Comos, Jt2go and 1 more | 2022-04-15 | 6.8 MEDIUM | 7.8 HIGH |
| An improper check for unusual or exceptional conditions issue exists within the parsing DGN files from Drawings SDK (Version 2022.4 and prior) resulting from the lack of proper validation of the user-supplied data. This may result in several of out-of-bounds problems and allow attackers to cause a denial-of-service condition or execute code in the context of the current process. | |||||
| CVE-2021-32944 | 2 Opendesign, Siemens | 4 Drawings Sdk, Comos, Jt2go and 1 more | 2022-04-15 | 6.8 MEDIUM | 7.8 HIGH |
| A use-after-free issue exists in the DGN file-reading procedure in the Drawings SDK (All versions prior to 2022.4) resulting from the lack of proper validation of user-supplied data. This can result in a memory corruption or arbitrary code execution, allowing attackers to cause a denial-of-service condition or execute code in the context of the current process. | |||||
| CVE-2021-32950 | 2 Opendesign, Siemens | 4 Drawings Sdk, Comos, Jt2go and 1 more | 2022-04-15 | 5.8 MEDIUM | 7.1 HIGH |
| An out-of-bounds read issue exists within the parsing of DXF files in the Drawings SDK (All versions prior to 2022.4) resulting from the lack of proper validation of user-supplied data. This can result in a read past the end of an allocated buffer and allows attackers to cause a denial-of-service condition or read sensitive information from memory locations. | |||||
| CVE-2021-46162 | 1 Siemens | 1 Simcenter Femap | 2022-04-15 | 6.8 MEDIUM | 7.8 HIGH |
| A vulnerability has been identified in Simcenter Femap (All versions < V2022.1.1). Affected application contains an out of bounds write past the end of an allocated structure while parsing specially crafted NEU files. This could allow an attacker to execute code in the context of the current process. (ZDI-CAN-15048) | |||||
| CVE-2021-33625 | 3 Insyde, Netapp, Siemens | 34 Insydeh2o, Fas\/aff Bios, Ruggedcom Ape1808 and 31 more | 2022-04-12 | 6.9 MEDIUM | 7.5 HIGH |
| An issue was discovered in Kernel 5.x in Insyde InsydeH2O, affecting HddPassword. Software SMI services that use the Communicate() function of the EFI_SMM_COMMUNICATION_PROTOCOL do not check whether the address of the buffer is valid, which allows use of SMRAM, MMIO, or OS kernel addresses. | |||||
| CVE-2020-5953 | 2 Insyde, Siemens | 33 Insydeh2o, Ruggedcom Ape1808, Ruggedcom Ape1808 Firmware and 30 more | 2022-04-12 | 6.9 MEDIUM | 7.5 HIGH |
| A vulnerability exists in System Management Interrupt (SWSMI) handler of InsydeH2O UEFI Firmware code located in SWSMI handler that dereferences gRT (EFI_RUNTIME_SERVICES) pointer to call a GetVariable service, which is located outside of SMRAM. This can result in code execution in SMM (escalating privilege from ring 0 to ring -2). | |||||
| CVE-2016-8561 | 1 Siemens | 2 Simatic Cp 1543-1, Simatic Cp 1543-1 Firmware | 2022-04-12 | 6.0 MEDIUM | 6.6 MEDIUM |
| A vulnerability has been identified in SIMATIC CP 1543-1 (All versions < V2.0.28), SIPLUS NET CP 1543-1 (All versions < V2.0.28). Users with elevated privileges to TIA-Portal and project data on the engineering station could possibly get privileged access on affected devices. | |||||
| CVE-2021-25178 | 2 Opendesign, Siemens | 4 Drawings Software Development Kit, Comos, Jt2go and 1 more | 2022-04-08 | 6.8 MEDIUM | 7.8 HIGH |
| An issue was discovered in Open Design Alliance Drawings SDK before 2021.11. A stack-based buffer overflow vulnerability exists when the recover operation is run with malformed .DXF and .DWG files. This can allow attackers to cause a crash potentially enabling a denial of service attack (Crash, Exit, or Restart) or possible code execution. | |||||
| CVE-2021-25173 | 2 Opendesign, Siemens | 4 Drawings Software Development Kit, Comos, Jt2go and 1 more | 2022-04-08 | 6.8 MEDIUM | 7.8 HIGH |
| An issue was discovered in Open Design Alliance Drawings SDK before 2021.12. A memory allocation with excessive size vulnerability exists when reading malformed DGN files, which allows attackers to cause a crash, potentially enabling denial of service (crash, exit, or restart). | |||||
| CVE-2021-25174 | 2 Opendesign, Siemens | 4 Drawings Software Development Kit, Comos, Jt2go and 1 more | 2022-04-08 | 6.8 MEDIUM | 7.8 HIGH |
| An issue was discovered in Open Design Alliance Drawings SDK before 2021.12. A memory corruption vulnerability exists when reading malformed DGN files. It can allow attackers to cause a crash, potentially enabling denial of service (Crash, Exit, or Restart). | |||||
| CVE-2021-25175 | 2 Opendesign, Siemens | 4 Drawings Software Development Kit, Comos, Jt2go and 1 more | 2022-04-08 | 6.8 MEDIUM | 7.8 HIGH |
| An issue was discovered in Open Design Alliance Drawings SDK before 2021.11. A Type Conversion issue exists when rendering malformed .DXF and .DWG files. This can allow attackers to cause a crash, potentially enabling a denial of service attack (Crash, Exit, or Restart). | |||||
| CVE-2021-25176 | 2 Opendesign, Siemens | 4 Drawings Software Development Kit, Comos, Jt2go and 1 more | 2022-04-08 | 6.8 MEDIUM | 7.8 HIGH |
| An issue was discovered in Open Design Alliance Drawings SDK before 2021.11. A NULL pointer dereference exists when rendering malformed .DXF and .DWG files. This can allow attackers to cause a crash, potentially enabling a denial of service attack (Crash, Exit, or Restart). | |||||