Total
258583 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2024-41044 | 2024-07-29 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: ppp: reject claimed-as-LCP but actually malformed packets Since 'ppp_async_encode()' assumes valid LCP packets (with code from 1 to 7 inclusive), add 'ppp_check_packet()' to ensure that LCP packet has an actual body beyond PPP_LCP header bytes, and reject claimed-as-LCP but actually malformed data otherwise. | |||||
| CVE-2024-41624 | 2024-07-29 | N/A | N/A | ||
| Incorrect access control in Himalaya Xiaoya nano smart speaker rom_version 1.6.96 allows a remote attacker to have an unspecified impact. | |||||
| CVE-2024-41032 | 2024-07-29 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: mm: vmalloc: check if a hash-index is in cpu_possible_mask The problem is that there are systems where cpu_possible_mask has gaps between set CPUs, for example SPARC. In this scenario addr_to_vb_xa() hash function can return an index which accesses to not-possible and not setup CPU area using per_cpu() macro. This results in an oops on SPARC. A per-cpu vmap_block_queue is also used as hash table, incorrectly assuming the cpu_possible_mask has no gaps. Fix it by adjusting an index to a next possible CPU. | |||||
| CVE-2023-52887 | 2024-07-29 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: net: can: j1939: enhanced error handling for tightly received RTS messages in xtp_rx_rts_session_new This patch enhances error handling in scenarios with RTS (Request to Send) messages arriving closely. It replaces the less informative WARN_ON_ONCE backtraces with a new error handling method. This provides clearer error messages and allows for the early termination of problematic sessions. Previously, sessions were only released at the end of j1939_xtp_rx_rts(). Potentially this could be reproduced with something like: testj1939 -r vcan0:0x80 & while true; do # send first RTS cansend vcan0 18EC8090#1014000303002301; # send second RTS cansend vcan0 18EC8090#1014000303002301; # send abort cansend vcan0 18EC8090#ff00000000002301; done | |||||
| CVE-2024-41817 | 2024-07-29 | N/A | 7.0 HIGH | ||
| ImageMagick is a free and open-source software suite, used for editing and manipulating digital images. The `AppImage` version `ImageMagick` might use an empty path when setting `MAGICK_CONFIGURE_PATH` and `LD_LIBRARY_PATH` environment variables while executing, which might lead to arbitrary code execution by loading malicious configuration files or shared libraries in the current working directory while executing `ImageMagick`. The vulnerability is fixed in 7.11-36. | |||||
| CVE-2024-41047 | 2024-07-29 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: i40e: Fix XDP program unloading while removing the driver The commit 6533e558c650 ("i40e: Fix reset path while removing the driver") introduced a new PF state "__I40E_IN_REMOVE" to block modifying the XDP program while the driver is being removed. Unfortunately, such a change is useful only if the ".ndo_bpf()" callback was called out of the rmmod context because unloading the existing XDP program is also a part of driver removing procedure. In other words, from the rmmod context the driver is expected to unload the XDP program without reporting any errors. Otherwise, the kernel warning with callstack is printed out to dmesg. Example failing scenario: 1. Load the i40e driver. 2. Load the XDP program. 3. Unload the i40e driver (using "rmmod" command). The example kernel warning log: [ +0.004646] WARNING: CPU: 94 PID: 10395 at net/core/dev.c:9290 unregister_netdevice_many_notify+0x7a9/0x870 [...] [ +0.010959] RIP: 0010:unregister_netdevice_many_notify+0x7a9/0x870 [...] [ +0.002726] Call Trace: [ +0.002457] <TASK> [ +0.002119] ? __warn+0x80/0x120 [ +0.003245] ? unregister_netdevice_many_notify+0x7a9/0x870 [ +0.005586] ? report_bug+0x164/0x190 [ +0.003678] ? handle_bug+0x3c/0x80 [ +0.003503] ? exc_invalid_op+0x17/0x70 [ +0.003846] ? asm_exc_invalid_op+0x1a/0x20 [ +0.004200] ? unregister_netdevice_many_notify+0x7a9/0x870 [ +0.005579] ? unregister_netdevice_many_notify+0x3cc/0x870 [ +0.005586] unregister_netdevice_queue+0xf7/0x140 [ +0.004806] unregister_netdev+0x1c/0x30 [ +0.003933] i40e_vsi_release+0x87/0x2f0 [i40e] [ +0.004604] i40e_remove+0x1a1/0x420 [i40e] [ +0.004220] pci_device_remove+0x3f/0xb0 [ +0.003943] device_release_driver_internal+0x19f/0x200 [ +0.005243] driver_detach+0x48/0x90 [ +0.003586] bus_remove_driver+0x6d/0xf0 [ +0.003939] pci_unregister_driver+0x2e/0xb0 [ +0.004278] i40e_exit_module+0x10/0x5f0 [i40e] [ +0.004570] __do_sys_delete_module.isra.0+0x197/0x310 [ +0.005153] do_syscall_64+0x85/0x170 [ +0.003684] ? syscall_exit_to_user_mode+0x69/0x220 [ +0.004886] ? do_syscall_64+0x95/0x170 [ +0.003851] ? exc_page_fault+0x7e/0x180 [ +0.003932] entry_SYSCALL_64_after_hwframe+0x71/0x79 [ +0.005064] RIP: 0033:0x7f59dc9347cb [ +0.003648] Code: 73 01 c3 48 8b 0d 65 16 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 35 16 0c 00 f7 d8 64 89 01 48 [ +0.018753] RSP: 002b:00007ffffac99048 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 [ +0.007577] RAX: ffffffffffffffda RBX: 0000559b9bb2f6e0 RCX: 00007f59dc9347cb [ +0.007140] RDX: 0000000000000000 RSI: 0000000000000800 RDI: 0000559b9bb2f748 [ +0.007146] RBP: 00007ffffac99070 R08: 1999999999999999 R09: 0000000000000000 [ +0.007133] R10: 00007f59dc9a5ac0 R11: 0000000000000206 R12: 0000000000000000 [ +0.007141] R13: 00007ffffac992d8 R14: 0000559b9bb2f6e0 R15: 0000000000000000 [ +0.007151] </TASK> [ +0.002204] ---[ end trace 0000000000000000 ]--- Fix this by checking if the XDP program is being loaded or unloaded. Then, block only loading a new program while "__I40E_IN_REMOVE" is set. Also, move testing "__I40E_IN_REMOVE" flag to the beginning of XDP_SETUP callback to avoid unnecessary operations and checks. | |||||
| CVE-2024-41067 | 2024-07-29 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: btrfs: scrub: handle RST lookup error correctly [BUG] When running btrfs/060 with forced RST feature, it would crash the following ASSERT() inside scrub_read_endio(): ASSERT(sector_nr < stripe->nr_sectors); Before that, we would have tree dump from btrfs_get_raid_extent_offset(), as we failed to find the RST entry for the range. [CAUSE] Inside scrub_submit_extent_sector_read() every time we allocated a new bbio we immediately called btrfs_map_block() to make sure there was some RST range covering the scrub target. But if btrfs_map_block() fails, we immediately call endio for the bbio, while the bbio is newly allocated, it's completely empty. Then inside scrub_read_endio(), we go through the bvecs to find the sector number (as bi_sector is no longer reliable if the bio is submitted to lower layers). And since the bio is empty, such bvecs iteration would not find any sector matching the sector, and return sector_nr == stripe->nr_sectors, triggering the ASSERT(). [FIX] Instead of calling btrfs_map_block() after allocating a new bbio, call btrfs_map_block() first. Since our only objective of calling btrfs_map_block() is only to update stripe_len, there is really no need to do that after btrfs_alloc_bio(). This new timing would avoid the problem of handling empty bbio completely, and in fact fixes a possible race window for the old code, where if the submission thread is the only owner of the pending_io, the scrub would never finish (since we didn't decrease the pending_io counter). Although the root cause of RST lookup failure still needs to be addressed. | |||||
| CVE-2024-41086 | 2024-07-29 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: bcachefs: Fix sb_field_downgrade validation - bch2_sb_downgrade_validate() wasn't checking for a downgrade entry extending past the end of the superblock section - for_each_downgrade_entry() is used in to_text() and needs to work on malformed input; it also was missing a check for a field extending past the end of the section | |||||
| CVE-2024-41819 | 2024-07-29 | N/A | 8.7 HIGH | ||
| Note Mark is a web-based Markdown notes app. A stored cross-site scripting (XSS) vulnerability in Note Mark allows attackers to execute arbitrary web scripts via a crafted payload injected into the URL value of a link in the markdown content. This vulnerability is fixed in 0.13.1. | |||||
| CVE-2024-41043 | 2024-07-29 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_queue: drop bogus WARN_ON Happens when rules get flushed/deleted while packet is out, so remove this WARN_ON. This WARN exists in one form or another since v4.14, no need to backport this to older releases, hence use a more recent fixes tag. | |||||
| CVE-2024-41062 | 2024-07-29 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: bluetooth/l2cap: sync sock recv cb and release The problem occurs between the system call to close the sock and hci_rx_work, where the former releases the sock and the latter accesses it without lock protection. CPU0 CPU1 ---- ---- sock_close hci_rx_work l2cap_sock_release hci_acldata_packet l2cap_sock_kill l2cap_recv_frame sk_free l2cap_conless_channel l2cap_sock_recv_cb If hci_rx_work processes the data that needs to be received before the sock is closed, then everything is normal; Otherwise, the work thread may access the released sock when receiving data. Add a chan mutex in the rx callback of the sock to achieve synchronization between the sock release and recv cb. Sock is dead, so set chan data to NULL, avoid others use invalid sock pointer. | |||||
| CVE-2024-41080 | 2024-07-29 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: io_uring: fix possible deadlock in io_register_iowq_max_workers() The io_register_iowq_max_workers() function calls io_put_sq_data(), which acquires the sqd->lock without releasing the uring_lock. Similar to the commit 009ad9f0c6ee ("io_uring: drop ctx->uring_lock before acquiring sqd->lock"), this can lead to a potential deadlock situation. To resolve this issue, the uring_lock is released before calling io_put_sq_data(), and then it is re-acquired after the function call. This change ensures that the locks are acquired in the correct order, preventing the possibility of a deadlock. | |||||
| CVE-2024-41810 | 2024-07-29 | N/A | 6.1 MEDIUM | ||
| Twisted is an event-based framework for internet applications, supporting Python 3.6+. The `twisted.web.util.redirectTo` function contains an HTML injection vulnerability. If application code allows an attacker to control the redirect URL this vulnerability may result in Reflected Cross-Site Scripting (XSS) in the redirect response HTML body. This vulnerability is fixed in 24.7.0rc1. | |||||
| CVE-2024-41034 | 2024-07-29 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix kernel bug on rename operation of broken directory Syzbot reported that in rename directory operation on broken directory on nilfs2, __block_write_begin_int() called to prepare block write may fail BUG_ON check for access exceeding the folio/page size. This is because nilfs_dotdot(), which gets parent directory reference entry ("..") of the directory to be moved or renamed, does not check consistency enough, and may return location exceeding folio/page size for broken directories. Fix this issue by checking required directory entries ("." and "..") in the first chunk of the directory in nilfs_dotdot(). | |||||
| CVE-2024-41088 | 2024-07-29 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: can: mcp251xfd: fix infinite loop when xmit fails When the mcp251xfd_start_xmit() function fails, the driver stops processing messages, and the interrupt routine does not return, running indefinitely even after killing the running application. Error messages: [ 441.298819] mcp251xfd spi2.0 can0: ERROR in mcp251xfd_start_xmit: -16 [ 441.306498] mcp251xfd spi2.0 can0: Transmit Event FIFO buffer not empty. (seq=0x000017c7, tef_tail=0x000017cf, tef_head=0x000017d0, tx_head=0x000017d3). ... and repeat forever. The issue can be triggered when multiple devices share the same SPI interface. And there is concurrent access to the bus. The problem occurs because tx_ring->head increments even if mcp251xfd_start_xmit() fails. Consequently, the driver skips one TX package while still expecting a response in mcp251xfd_handle_tefif_one(). Resolve the issue by starting a workqueue to write the tx obj synchronously if err = -EBUSY. In case of another error, decrement tx_ring->head, remove skb from the echo stack, and drop the message. [mkl: use more imperative wording in patch description] | |||||
| CVE-2024-41031 | 2024-07-29 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: mm/filemap: skip to create PMD-sized page cache if needed On ARM64, HPAGE_PMD_ORDER is 13 when the base page size is 64KB. The PMD-sized page cache can't be supported by xarray as the following error messages indicate. ------------[ cut here ]------------ WARNING: CPU: 35 PID: 7484 at lib/xarray.c:1025 xas_split_alloc+0xf8/0x128 Modules linked in: nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib \ nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct \ nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 \ ip_set rfkill nf_tables nfnetlink vfat fat virtio_balloon drm \ fuse xfs libcrc32c crct10dif_ce ghash_ce sha2_ce sha256_arm64 \ sha1_ce virtio_net net_failover virtio_console virtio_blk failover \ dimlib virtio_mmio CPU: 35 PID: 7484 Comm: test Kdump: loaded Tainted: G W 6.10.0-rc5-gavin+ #9 Hardware name: QEMU KVM Virtual Machine, BIOS edk2-20240524-1.el9 05/24/2024 pstate: 83400005 (Nzcv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--) pc : xas_split_alloc+0xf8/0x128 lr : split_huge_page_to_list_to_order+0x1c4/0x720 sp : ffff800087a4f6c0 x29: ffff800087a4f6c0 x28: ffff800087a4f720 x27: 000000001fffffff x26: 0000000000000c40 x25: 000000000000000d x24: ffff00010625b858 x23: ffff800087a4f720 x22: ffffffdfc0780000 x21: 0000000000000000 x20: 0000000000000000 x19: ffffffdfc0780000 x18: 000000001ff40000 x17: 00000000ffffffff x16: 0000018000000000 x15: 51ec004000000000 x14: 0000e00000000000 x13: 0000000000002000 x12: 0000000000000020 x11: 51ec000000000000 x10: 51ece1c0ffff8000 x9 : ffffbeb961a44d28 x8 : 0000000000000003 x7 : ffffffdfc0456420 x6 : ffff0000e1aa6eb8 x5 : 20bf08b4fe778fca x4 : ffffffdfc0456420 x3 : 0000000000000c40 x2 : 000000000000000d x1 : 000000000000000c x0 : 0000000000000000 Call trace: xas_split_alloc+0xf8/0x128 split_huge_page_to_list_to_order+0x1c4/0x720 truncate_inode_partial_folio+0xdc/0x160 truncate_inode_pages_range+0x1b4/0x4a8 truncate_pagecache_range+0x84/0xa0 xfs_flush_unmap_range+0x70/0x90 [xfs] xfs_file_fallocate+0xfc/0x4d8 [xfs] vfs_fallocate+0x124/0x2e8 ksys_fallocate+0x4c/0xa0 __arm64_sys_fallocate+0x24/0x38 invoke_syscall.constprop.0+0x7c/0xd8 do_el0_svc+0xb4/0xd0 el0_svc+0x44/0x1d8 el0t_64_sync_handler+0x134/0x150 el0t_64_sync+0x17c/0x180 Fix it by skipping to allocate PMD-sized page cache when its size is larger than MAX_PAGECACHE_ORDER. For this specific case, we will fall to regular path where the readahead window is determined by BDI's sysfs file (read_ahead_kb). | |||||
| CVE-2024-41035 | 2024-07-29 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: USB: core: Fix duplicate endpoint bug by clearing reserved bits in the descriptor Syzbot has identified a bug in usbcore (see the Closes: tag below) caused by our assumption that the reserved bits in an endpoint descriptor's bEndpointAddress field will always be 0. As a result of the bug, the endpoint_is_duplicate() routine in config.c (and possibly other routines as well) may believe that two descriptors are for distinct endpoints, even though they have the same direction and endpoint number. This can lead to confusion, including the bug identified by syzbot (two descriptors with matching endpoint numbers and directions, where one was interrupt and the other was bulk). To fix the bug, we will clear the reserved bits in bEndpointAddress when we parse the descriptor. (Note that both the USB-2.0 and USB-3.1 specs say these bits are "Reserved, reset to zero".) This requires us to make a copy of the descriptor earlier in usb_parse_endpoint() and use the copy instead of the original when checking for duplicates. | |||||
| CVE-2024-41075 | 2024-07-29 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: cachefiles: add consistency check for copen/cread This prevents malicious processes from completing random copen/cread requests and crashing the system. Added checks are listed below: * Generic, copen can only complete open requests, and cread can only complete read requests. * For copen, ondemand_id must not be 0, because this indicates that the request has not been read by the daemon. * For cread, the object corresponding to fd and req should be the same. | |||||
| CVE-2024-41676 | 2024-07-29 | N/A | 4.1 MEDIUM | ||
| Magento-lts is a long-term support alternative to Magento Community Edition (CE). This XSS vulnerability affects the design/header/welcome, design/header/logo_src, design/header/logo_src_small, and design/header/logo_alt system configs.They are intended to enable admins to set a text in the two cases, and to define an image url for the other two cases. But because of previously missing escaping allowed to input arbitrary html and as a consequence also arbitrary JavaScript. The problem is patched with Version 20.10.1 or higher. | |||||
| CVE-2024-41046 | 2024-07-29 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: net: ethernet: lantiq_etop: fix double free in detach The number of the currently released descriptor is never incremented which results in the same skb being released multiple times. | |||||