Total
486 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2019-12653 | 1 Cisco | 6 Asr 902, Asr 902u, Asr 903 and 3 more | 2019-10-09 | 7.8 HIGH | 7.5 HIGH |
| A vulnerability in the Raw Socket Transport feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to trigger a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to improper parsing of Raw Socket Transport payloads. An attacker could exploit this vulnerability by establishing a TCP session and then sending a malicious TCP segment via IPv4 to an affected device. This cannot be exploited via IPv6, as the Raw Socket Transport feature does not support IPv6 as a network layer protocol. | |||||
| CVE-2019-12649 | 1 Cisco | 87 Catalyst 3850-12s-e, Catalyst 3850-12s-s, Catalyst 3850-12xs-e and 84 more | 2019-10-09 | 7.2 HIGH | 6.7 MEDIUM |
| A vulnerability in the Image Verification feature of Cisco IOS XE Software could allow an authenticated, local attacker to install and boot a malicious software image or execute unsigned binaries on an affected device. The vulnerability exists because, under certain circumstances, an affected device can be configured to not verify the digital signatures of system image files during the boot process. An attacker could exploit this vulnerability by abusing a specific feature that is part of the device boot process. A successful exploit could allow the attacker to install and boot a malicious software image or execute unsigned binaries on the targeted device. | |||||
| CVE-2019-12647 | 1 Cisco | 28 1100, 4221, 4321 and 25 more | 2019-10-09 | 7.8 HIGH | 7.5 HIGH |
| A vulnerability in the Ident protocol handler of Cisco IOS and IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability exists because the affected software incorrectly handles memory structures, leading to a NULL pointer dereference. An attacker could exploit this vulnerability by opening a TCP connection to specific ports and sending traffic over that connection. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition. | |||||
| CVE-2019-12643 | 1 Cisco | 8 4221 Integrated Services Router, 4321 Integrated Services Router, 4331 Integrated Services Router and 5 more | 2019-10-09 | 10.0 HIGH | 10.0 CRITICAL |
| A vulnerability in the Cisco REST API virtual service container for Cisco IOS XE Software could allow an unauthenticated, remote attacker to bypass authentication on the managed Cisco IOS XE device. The vulnerability is due to an improper check performed by the area of code that manages the REST API authentication service. An attacker could exploit this vulnerability by submitting malicious HTTP requests to the targeted device. A successful exploit could allow the attacker to obtain the token-id of an authenticated user. This token-id could be used to bypass authentication and execute privileged actions through the interface of the REST API virtual service container on the affected Cisco IOS XE device. The REST API interface is not enabled by default and must be installed and activated separately on IOS XE devices. See the Details section for more information. | |||||
| CVE-2019-12624 | 1 Cisco | 19 5760 Wireless Lan Controller, Catalyst 3650-12x48uq, Catalyst 3650-12x48ur and 16 more | 2019-10-09 | 6.8 MEDIUM | 8.8 HIGH |
| A vulnerability in the web-based management interface of Cisco IOS XE New Generation Wireless Controller (NGWC) could allow an unauthenticated, remote attacker to conduct a cross-site request forgery (CSRF) attack and perform arbitrary actions on an affected device. The vulnerability is due to insufficient CSRF protections for the web-based management interface of the affected software. An attacker could exploit this vulnerability by persuading a user of the interface to follow a crafted link. A successful exploit could allow the attacker to perform arbitrary actions on an affected device by using a web browser and with the privileges of the user. | |||||
| CVE-2018-15374 | 1 Cisco | 1 Ios Xe | 2019-10-09 | 7.2 HIGH | 6.7 MEDIUM |
| A vulnerability in the Image Verification feature of Cisco IOS XE Software could allow an authenticated, local attacker to install a malicious software image or file on an affected device. The vulnerability is due to the affected software improperly verifying digital signatures for software images and files that are uploaded to a device. An attacker could exploit this vulnerability by uploading a malicious software image or file to an affected device. A successful exploit could allow the attacker to bypass digital signature verification checks for software images and files and install a malicious software image or file on the affected device. | |||||
| CVE-2018-15372 | 1 Cisco | 1 Ios Xe | 2019-10-09 | 4.8 MEDIUM | 8.1 HIGH |
| A vulnerability in the MACsec Key Agreement (MKA) using Extensible Authentication Protocol-Transport Layer Security (EAP-TLS) functionality of Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to bypass authentication and pass traffic through a Layer 3 interface of an affected device. The vulnerability is due to a logic error in the affected software. An attacker could exploit this vulnerability by connecting to and passing traffic through a Layer 3 interface of an affected device, if the interface is configured for MACsec MKA using EAP-TLS and is running in access-session closed mode. A successful exploit could allow the attacker to bypass 802.1x network access controls and gain access to the network. | |||||
| CVE-2018-15371 | 1 Cisco | 1 Ios Xe | 2019-10-09 | 7.2 HIGH | 6.7 MEDIUM |
| A vulnerability in the shell access request mechanism of Cisco IOS XE Software could allow an authenticated, local attacker to bypass authentication and gain unrestricted access to the root shell of an affected device. The vulnerability exists because the affected software has insufficient authentication mechanisms for certain commands. An attacker could exploit this vulnerability by requesting access to the root shell of an affected device, after the shell access feature has been enabled. A successful exploit could allow the attacker to bypass authentication and gain unrestricted access to the root shell of the affected device. | |||||
| CVE-2018-15369 | 1 Cisco | 2 Ios, Ios Xe | 2019-10-09 | 7.8 HIGH | 6.8 MEDIUM |
| A vulnerability in the TACACS+ client subsystem of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to improper handling of crafted TACACS+ response packets by the affected software. An attacker could exploit this vulnerability by injecting a crafted TACACS+ packet into an existing TACACS+ session between an affected device and a TACACS+ server or by impersonating a known, valid TACACS+ server and sending a crafted TACACS+ packet to an affected device when establishing a connection to the device. To exploit this vulnerability by using either method, the attacker must know the shared TACACS+ secret and the crafted packet must be sent in response to a TACACS+ request from a TACACS+ client. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. | |||||
| CVE-2018-0485 | 1 Cisco | 2 Ios, Ios Xe | 2019-10-09 | 7.8 HIGH | 8.6 HIGH |
| A vulnerability in the SM-1T3/E3 firmware on Cisco Second Generation Integrated Services Routers (ISR G2) and the Cisco 4451-X Integrated Services Router (ISR4451-X) could allow an unauthenticated, remote attacker to cause the ISR G2 Router or the SM-1T3/E3 module on the ISR4451-X to reload, resulting in a denial of service (DoS) condition on an affected device. The vulnerability is due to improper handling of user input. An attacker could exploit this vulnerability by first connecting to the SM-1T3/E3 module console and entering a string sequence. A successful exploit could allow the attacker to cause the ISR G2 Router or the SM-1T3/E3 module on the ISR4451-X to reload, resulting in a DoS condition on an affected device. | |||||
| CVE-2018-0480 | 1 Cisco | 1 Ios Xe | 2019-10-09 | 5.7 MEDIUM | 6.1 MEDIUM |
| A vulnerability in the errdisable per VLAN feature of Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to cause the device to crash, leading to a denial of service (DoS) condition. The vulnerability is due to a race condition that occurs when the VLAN and port enter an errdisabled state, resulting in an incorrect state in the software. An attacker could exploit this vulnerability by sending frames that trigger the errdisable condition. A successful exploit could allow the attacker to cause the affected device to crash, leading to a DoS condition. | |||||
| CVE-2018-0476 | 1 Cisco | 1 Ios Xe | 2019-10-09 | 7.1 HIGH | 5.9 MEDIUM |
| A vulnerability in the Network Address Translation (NAT) Session Initiation Protocol (SIP) Application Layer Gateway (ALG) of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to improper processing of SIP packets in transit while NAT is performed on an affected device. An unauthenticated, remote attacker could exploit this vulnerability by sending crafted SIP packets via UDP port 5060 through an affected device that is performing NAT for SIP packets. A successful exploit could allow an attacker to cause the device to reload, resulting in a denial of service (DoS) condition. | |||||
| CVE-2018-0475 | 1 Cisco | 2 Ios, Ios Xe | 2019-10-09 | 6.1 MEDIUM | 7.4 HIGH |
| A vulnerability in the implementation of the cluster feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to trigger a denial of service (DoS) condition on an affected device. The vulnerability is due to improper input validation when handling Cluster Management Protocol (CMP) messages. An attacker could exploit this vulnerability by sending a malicious CMP message to an affected device. A successful exploit could allow the attacker to cause the switch to crash and reload or to hang, resulting in a DoS condition. If the switch hangs it will not reboot automatically, and it will need to be power cycled manually to recover. | |||||
| CVE-2018-0469 | 1 Cisco | 1 Ios Xe | 2019-10-09 | 7.1 HIGH | 6.8 MEDIUM |
| A vulnerability in the web user interface of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to a double-free-in-memory handling by the affected software when specific HTTP requests are processed. An attacker could exploit this vulnerability by sending specific HTTP requests to the web user interface of the affected software. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition on an affected device. To exploit this vulnerability, the attacker must have access to the management interface of the affected software, which is typically connected to a restricted management network. | |||||
| CVE-2018-0257 | 1 Cisco | 1 Ios Xe | 2019-10-09 | 3.3 LOW | 4.3 MEDIUM |
| A vulnerability in Cisco IOS XE Software running on Cisco cBR Series Converged Broadband Routers could allow an unauthenticated, adjacent attacker to cause high CPU usage on an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to the incorrect handling of certain DHCP packets. An attacker could exploit this vulnerability by sending certain DHCP packets to a specific segment of an affected device. A successful exploit could allow the attacker to increase CPU usage on the affected device and cause a DoS condition. Cisco Bug IDs: CSCvg73687. | |||||
| CVE-2018-0197 | 1 Cisco | 2 Ios, Ios Xe | 2019-10-09 | 3.3 LOW | 6.5 MEDIUM |
| A vulnerability in the VLAN Trunking Protocol (VTP) subsystem of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to corrupt the internal VTP database on an affected device and cause a denial of service (DoS) condition. The vulnerability is due to a logic error in how the affected software handles a subset of VTP packets. An attacker could exploit this vulnerability by sending VTP packets in a sequence that triggers a timeout in the VTP message processing code of the affected software. A successful exploit could allow the attacker to impact the ability to create, modify, or delete VLANs and cause a DoS condition. There are workarounds that address this vulnerability. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS Software or Cisco IOS XE Software, are operating in VTP client mode or VTP server mode, and do not have a VTP domain name configured. The default configuration for Cisco devices that are running Cisco IOS Software or Cisco IOS XE Software and support VTP is to operate in VTP server mode with no domain name configured. | |||||
| CVE-2018-0195 | 1 Cisco | 1 Ios Xe | 2019-10-09 | 6.5 MEDIUM | 8.8 HIGH |
| A vulnerability in the Cisco IOS XE Software REST API could allow an authenticated, remote attacker to bypass API authorization checks and use the API to perform privileged actions on an affected device. The vulnerability is due to insufficient authorization checks for requests that are sent to the REST API of the affected software. An attacker could exploit this vulnerability by sending a malicious request to an affected device via the REST API. A successful exploit could allow the attacker to selectively bypass authorization checks for the REST API of the affected software and use the API to perform privileged actions on an affected device. Cisco Bug IDs: CSCuz56428. | |||||
| CVE-2018-0194 | 1 Cisco | 1 Ios Xe | 2019-10-09 | 7.2 HIGH | 7.8 HIGH |
| Multiple vulnerabilities in the CLI parser of Cisco IOS XE Software could allow an authenticated, local attacker to inject arbitrary commands into the CLI of the affected software, which could allow the attacker to gain access to the underlying Linux shell of an affected device and execute commands with root privileges on the device. The vulnerabilities exist because the affected software does not sufficiently sanitize command arguments before passing commands to the Linux shell for execution. An attacker could exploit these vulnerabilities by submitting a malicious CLI command to the affected software. A successful exploit could allow the attacker to break from the CLI of the affected software, which could allow the attacker to gain access to the underlying Linux shell on an affected device and execute arbitrary commands with root privileges on the device. Cisco Bug IDs: CSCuz03145, CSCuz56419, CSCva31971, CSCvb09542. | |||||
| CVE-2018-0193 | 1 Cisco | 1 Ios Xe | 2019-10-09 | 7.2 HIGH | 7.8 HIGH |
| Multiple vulnerabilities in the CLI parser of Cisco IOS XE Software could allow an authenticated, local attacker to inject arbitrary commands into the CLI of the affected software, which could allow the attacker to gain access to the underlying Linux shell of an affected device and execute commands with root privileges on the device. The vulnerabilities exist because the affected software does not sufficiently sanitize command arguments before passing commands to the Linux shell for execution. An attacker could exploit these vulnerabilities by submitting a malicious CLI command to the affected software. A successful exploit could allow the attacker to break from the CLI of the affected software, which could allow the attacker to gain access to the underlying Linux shell on an affected device and execute arbitrary commands with root privileges on the device. Cisco Bug IDs: CSCuz03145, CSCuz56419, CSCva31971, CSCvb09542. | |||||
| CVE-2018-0190 | 1 Cisco | 1 Ios Xe | 2019-10-09 | 4.3 MEDIUM | 6.1 MEDIUM |
| Multiple vulnerabilities in the web-based user interface (web UI) of Cisco IOS XE Software could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the web UI of the affected software. The vulnerabilities are due to insufficient input validation of certain parameters that are passed to the affected software via the web UI. An attacker could exploit these vulnerabilities by persuading a user of the affected UI to access a malicious link or by intercepting a user request for the affected UI and injecting malicious code into the request. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected UI or allow the attacker to access sensitive browser-based information on the user's system. Cisco Bug IDs: CSCuz38591, CSCvb09530, CSCvb10022. | |||||