Filtered by vendor Cisco
Subscribe
Total
6072 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2018-0102 | 1 Cisco | 1 Nx-os | 2019-10-09 | 6.1 MEDIUM | 7.4 HIGH |
| A vulnerability in the Pong tool of Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to cause a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability exists because the affected software attempts to free the same area of memory twice. An attacker could exploit this vulnerability by sending a pong request to an affected device from a location on the network that causes the pong reply packet to egress both a FabricPath port and a non-FabricPath port. An exploit could allow the attacker to cause a dual or quad supervisor virtual port-channel (vPC) to reload. This vulnerability affects the following products when running Cisco NX-OS Software Release 7.2(1)D(1), 7.2(2)D1(1), or 7.2(2)D1(2) with both the Pong and FabricPath features enabled and the FabricPath port is actively monitored via a SPAN session: Cisco Nexus 7000 Series Switches and Cisco Nexus 7700 Series Switches. Cisco Bug IDs: CSCuv98660. | |||||
| CVE-2018-0100 | 1 Cisco | 1 Anyconnect Secure Mobility Client | 2019-10-09 | 3.6 LOW | 4.4 MEDIUM |
| A vulnerability in the Profile Editor of the Cisco AnyConnect Secure Mobility Client could allow an unauthenticated, local attacker to have read and write access to information stored in the affected system. The vulnerability is due to improper handling of the XML External Entity (XXE) entries when parsing an XML file. An attacker could exploit this vulnerability by injecting a crafted XML file with malicious entries, which could allow the attacker to read and write files. Cisco Bug IDs: CSCvg19341. | |||||
| CVE-2018-0099 | 1 Cisco | 2 D9800, D9800 Firmware | 2019-10-09 | 9.0 HIGH | 8.8 HIGH |
| A vulnerability in the web management GUI of the Cisco D9800 Network Transport Receiver could allow an authenticated, remote attacker to perform a command injection attack. The vulnerability is due to insufficient input validation of GUI command arguments. An attacker could exploit this vulnerability by injecting crafted arguments into a vulnerable GUI command. An exploit could allow the attacker to execute commands on the underlying BusyBox operating system. These commands are run at the privilege level of the authenticated user. The attacker needs valid device credentials for this attack. Cisco Bug IDs: CSCvg74691. | |||||
| CVE-2018-0098 | 1 Cisco | 4 Wap150, Wap150 Firmware, Wap361 and 1 more | 2019-10-09 | 4.3 MEDIUM | 6.1 MEDIUM |
| A vulnerability in the web-based management interface of Cisco WAP150 Wireless-AC/N Dual Radio Access Point with Power over Ethernet (PoE) and WAP361 Wireless-AC/N Dual Radio Wall Plate Access Point with PoE could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the web-based management interface of an affected device. The vulnerability is due to insufficient validation of user-supplied input by the web-based management interface of an affected device. An attacker could exploit this vulnerability by persuading a user of the interface to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the interface or allow the attacker to access sensitive browser-based information. Cisco Bug IDs: CSCve57076. | |||||
| CVE-2018-0097 | 1 Cisco | 1 Prime Infrastructure | 2019-10-09 | 5.8 MEDIUM | 6.1 MEDIUM |
| A vulnerability in the web interface of Cisco Prime Infrastructure could allow an unauthenticated, remote attacker to redirect a user to a malicious web page, aka an Open Redirect. The vulnerability is due to improper input validation of the parameters in the HTTP request. An attacker could exploit this vulnerability by crafting an HTTP request that could cause the web application to redirect the request to a specific malicious URL. This vulnerability is known as an open redirect attack and is used in phishing attacks to get users to visit malicious sites without their knowledge. Cisco Bug IDs: CSCve37646. | |||||
| CVE-2018-0096 | 1 Cisco | 1 Prime Infrastructure | 2019-10-09 | 4.9 MEDIUM | 5.9 MEDIUM |
| A vulnerability in the role-based access control (RBAC) functionality of Cisco Prime Infrastructure could allow an authenticated, remote attacker to perform a privilege escalation in which one virtual domain user can view and modify another virtual domain configuration. The vulnerability is due to a failure to properly enforce RBAC for virtual domains. An attacker could exploit this vulnerability by sending an authenticated, crafted HTTP request to a targeted application. An exploit could allow the attacker to bypass RBAC policies on the targeted system to modify a virtual domain and access resources that are not normally accessible. Cisco Bug IDs: CSCvg36875. | |||||
| CVE-2018-0095 | 1 Cisco | 1 Asyncos | 2019-10-09 | 7.2 HIGH | 7.8 HIGH |
| A vulnerability in the administrative shell of Cisco AsyncOS on Cisco Email Security Appliance (ESA) and Content Security Management Appliance (SMA) could allow an authenticated, local attacker to escalate their privilege level and gain root access. The attacker has to have a valid user credential with at least a privilege level of a guest user. The vulnerability is due to an incorrect networking configuration at the administrative shell CLI. An attacker could exploit this vulnerability by authenticating to the targeted device and issuing a set of crafted, malicious commands at the administrative shell. An exploit could allow the attacker to gain root access on the device. Cisco Bug IDs: CSCvb34303, CSCvb35726. | |||||
| CVE-2018-0094 | 1 Cisco | 1 Unified Computing System Central Software | 2019-10-09 | 5.0 MEDIUM | 7.5 HIGH |
| A vulnerability in IPv6 ingress packet processing for Cisco UCS Central Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition due to high CPU utilization on the targeted device. The vulnerability is due to insufficient rate limiting protection for IPv6 ingress traffic. An attacker could exploit this vulnerability by sending the affected device a high rate of IPv6 packets. Successful exploitation could allow the attacker to cause a DoS condition due to CPU and resource constraints. Cisco Bug IDs: CSCuv34544. | |||||
| CVE-2018-0093 | 1 Cisco | 1 Web Security Appliance | 2019-10-09 | 4.3 MEDIUM | 6.1 MEDIUM |
| A vulnerability in the web-based management interface of Cisco Web Security Appliance (WSA) could allow an unauthenticated, remote attacker to conduct a reflected cross-site scripting (XSS) attack against a user of the web-based management interface of an affected device. The vulnerability is due to insufficient validation of user-supplied input by the web-based management interface of an affected device. An attacker could exploit this vulnerability by persuading a user of the interface to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the interface or allow the attacker to access sensitive browser-based information. Cisco Bug IDs: CSCvf37392. | |||||
| CVE-2018-0092 | 1 Cisco | 20 Nexus 92160yc Switch, Nexus 92300yc Switch, Nexus 92304qc Switch and 17 more | 2019-10-09 | 3.6 LOW | 7.1 HIGH |
| A vulnerability in the network-operator user role implementation for Cisco NX-OS System Software could allow an authenticated, local attacker to improperly delete valid user accounts. The network-operator role should not be able to delete other configured users on the device. The vulnerability is due to a lack of proper role-based access control (RBAC) checks for the actions that a user with the network-operator role is allowed to perform. An attacker could exploit this vulnerability by authenticating to the device with user credentials that give that user the network-operator role. Successful exploitation could allow the attacker to impact the integrity of the device by deleting configured user credentials. The attacker would need valid user credentials for the device. This vulnerability affects the following Cisco products running Cisco NX-OS System Software: Nexus 3000 Series Switches, Nexus 3600 Platform Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules. Cisco Bug IDs: CSCvg21120. | |||||
| CVE-2018-0091 | 1 Cisco | 1 Identity Services Engine | 2019-10-09 | 4.3 MEDIUM | 6.1 MEDIUM |
| A vulnerability in the web-based management interface of Cisco Identity Services Engine (ISE) could allow an unauthenticated, remote attacker to conduct a Document Object Model (DOM) cross-site scripting (XSS) attack against a user of the web-based management interface of an affected device. The vulnerability is due to insufficient validation of user-supplied input by the web-based management interface. An attacker could exploit this vulnerability by persuading a user of the interface to click a malicious link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the interface or allow the attacker to access sensitive browser-based information. Cisco Bug IDs: CSCvf73922. | |||||
| CVE-2018-0090 | 1 Cisco | 1 Nx-os | 2019-10-09 | 5.0 MEDIUM | 7.5 HIGH |
| A vulnerability in management interface access control list (ACL) configuration of Cisco NX-OS System Software could allow an unauthenticated, remote attacker to bypass configured ACLs on the management interface. This could allow traffic to be forwarded to the NX-OS CPU for processing, leading to high CPU utilization and a denial of service (DoS) condition. The vulnerability is due to a bad code fix in the 7.3.2 code train that could allow traffic to the management interface to be misclassified and not match the proper configured ACLs. An attacker could exploit this vulnerability by sending crafted traffic to the management interface. An exploit could allow the attacker to bypass the configured management interface ACLs and impact the CPU of the targeted device, resulting in a DoS condition. This vulnerability affects the following Cisco products running Cisco NX-OS System Software: Multilayer Director Switches, Nexus 2000 Series Switches, Nexus 3000 Series Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode. Cisco Bug IDs: CSCvf31132. | |||||
| CVE-2018-0089 | 1 Cisco | 1 Policy Suite | 2019-10-09 | 5.0 MEDIUM | 7.5 HIGH |
| A vulnerability in the Policy and Charging Rules Function (PCRF) of the Cisco Policy Suite (CPS) could allow an unauthenticated, remote attacker to access sensitive data. The attacker could use this information to conduct additional reconnaissance attacks. The attacker would also have to have access to the internal VLAN where CPS is deployed. The vulnerability is due to incorrect permissions of certain system files and not sufficiently protecting sensitive data that is at rest. An attacker could exploit the vulnerability by using certain tools available on the internal network interface to request and view system files. An exploit could allow the attacker to find out sensitive information about the application. Cisco Bug IDs: CSCvf77666. | |||||
| CVE-2018-0088 | 1 Cisco | 3 Ie-4010-16s12p, Ie-4010-4s24p, Industrial Ethernet 4010 Series Firmware | 2019-10-09 | 7.2 HIGH | 6.7 MEDIUM |
| A vulnerability in one of the diagnostic test CLI commands on Cisco Industrial Ethernet 4010 Series Switches running Cisco IOS Software could allow an authenticated, local attacker to impact the stability of the device. This could result in arbitrary code execution or a denial of service (DoS) condition. The attacker has to have valid user credentials at privilege level 15. The vulnerability is due to a diagnostic test CLI command that allows the attacker to write to the device memory. An attacker could exploit this vulnerability by authenticating to the targeted device and issuing a specific diagnostic test command at the CLI. An exploit could allow the attacker to overwrite system memory locations, which could have a negative impact on the stability of the device. Cisco Bug IDs: CSCvf71150. | |||||
| CVE-2018-0087 | 1 Cisco | 1 Asyncos | 2019-10-09 | 6.8 MEDIUM | 5.6 MEDIUM |
| A vulnerability in the FTP server of the Cisco Web Security Appliance (WSA) could allow an unauthenticated, remote attacker to log in to the FTP server of the device without a valid password. The attacker does need to have a valid username. The vulnerability is due to incorrect FTP user credential validation. An attacker could exploit this vulnerability by using FTP to connect to the management IP address of the targeted device. A successful exploit could allow the attacker to log in to the FTP server of the Cisco WSA without having a valid password. This vulnerability affects Cisco AsyncOS for WSA Software on both virtual and hardware appliances that are running any release of Cisco AsyncOS 10.5.1 for WSA Software. The device is vulnerable only if FTP is enabled on the management interface. FTP is disabled by default. Cisco Bug IDs: CSCvf74281. | |||||
| CVE-2018-0086 | 1 Cisco | 1 Unified Customer Voice Portal | 2019-10-09 | 5.0 MEDIUM | 8.6 HIGH |
| A vulnerability in the application server of the Cisco Unified Customer Voice Portal (CVP) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on the affected device. The vulnerability is due to malformed SIP INVITE traffic received on the CVP during communications with the Cisco Virtualized Voice Browser (VVB). An attacker could exploit this vulnerability by sending malformed SIP INVITE traffic to the targeted appliance. An exploit could allow the attacker to impact the availability of services and data on the device, causing a DoS condition. This vulnerability affects Cisco Unified CVP running any software release prior to 11.6(1). Cisco Bug IDs: CSCve85840. | |||||
| CVE-2017-6796 | 1 Cisco | 1 Ios Xe | 2019-10-09 | 7.2 HIGH | 6.7 MEDIUM |
| A vulnerability in the USB-modem code of Cisco IOS XE Software running on Cisco ASR 920 Series Aggregation Services Routers could allow an authenticated, local attacker to inject and execute arbitrary commands on the underlying operating system of an affected device. The vulnerability is due to improper input validation of the platform usb modem command in the CLI of the affected software. An attacker could exploit this vulnerability by modifying the platform usb modem command in the CLI of an affected device. A successful exploit could allow the attacker to inject and execute arbitrary commands on the underlying operating system of an affected device. Cisco Bug IDs: CSCve48949. | |||||
| CVE-2017-6795 | 1 Cisco | 10 Asr-920-10sz-pd, Asr-920-12cz-a, Asr-920-12sz-im and 7 more | 2019-10-09 | 4.7 MEDIUM | 4.4 MEDIUM |
| A vulnerability in the USB-modem code of Cisco IOS XE Software running on Cisco ASR 920 Series Aggregation Services Routers could allow an authenticated, local attacker to overwrite arbitrary files on the underlying operating system of an affected device. The vulnerability is due to improper input validation of the platform usb modem command in the CLI of the affected software. An attacker could exploit this vulnerability by modifying the platform usb modem command in the CLI of an affected device. A successful exploit could allow the attacker to overwrite arbitrary files on the underlying operating system of an affected device. Cisco Bug IDs: CSCvf10783. | |||||
| CVE-2017-6794 | 1 Cisco | 1 Meeting Server | 2019-10-09 | 7.2 HIGH | 6.7 MEDIUM |
| A vulnerability in the CLI command-parsing code of Cisco Meeting Server could allow an authenticated, local attacker to perform command injection and escalate their privileges to root. The attacker must first authenticate to the application with valid administrator credentials. The vulnerability is due to insufficient validation of user-supplied input at the CLI for certain commands. An attacker could exploit this vulnerability by authenticating to the affected application and submitting a crafted CLI command for execution at the Cisco Meeting Server CLI. An exploit could allow the attacker to perform command injection and escalate their privilege level to root. Vulnerable Products: This vulnerability exists in Cisco Meeting Server software versions prior to and including 2.0, 2.1, and 2.2. Cisco Bug IDs: CSCvf53830. | |||||
| CVE-2017-6793 | 1 Cisco | 1 Prime Collaboration Provisioning | 2019-10-09 | 4.0 MEDIUM | 6.5 MEDIUM |
| A vulnerability in the Inventory Management feature of Cisco Prime Collaboration Provisioning Tool could allow an authenticated, remote attacker to view sensitive information on the system. The vulnerability is due to insufficient protection of restricted information. An attacker could exploit this vulnerability by accessing unauthorized information via the user interface. Cisco Bug IDs: CSCvd61932. | |||||