Total
27847 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2021-46953 | 1 Linux | 1 Linux Kernel | 2024-04-10 | N/A | 6.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ACPI: GTDT: Don't corrupt interrupt mappings on watchdow probe failure When failing the driver probe because of invalid firmware properties, the GTDT driver unmaps the interrupt that it mapped earlier. However, it never checks whether the mapping of the interrupt actially succeeded. Even more, should the firmware report an illegal interrupt number that overlaps with the GIC SGI range, this can result in an IPI being unmapped, and subsequent fireworks (as reported by Dann Frazier). Rework the driver to have a slightly saner behaviour and actually check whether the interrupt has been mapped before unmapping things. | |||||
| CVE-2021-46950 | 1 Linux | 1 Linux Kernel | 2024-04-10 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: md/raid1: properly indicate failure when ending a failed write request This patch addresses a data corruption bug in raid1 arrays using bitmaps. Without this fix, the bitmap bits for the failed I/O end up being cleared. Since we are in the failure leg of raid1_end_write_request, the request either needs to be retried (R1BIO_WriteError) or failed (R1BIO_Degraded). | |||||
| CVE-2021-46945 | 1 Linux | 1 Linux Kernel | 2024-04-10 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ext4: always panic when errors=panic is specified Before commit 014c9caa29d3 ("ext4: make ext4_abort() use __ext4_error()"), the following series of commands would trigger a panic: 1. mount /dev/sda -o ro,errors=panic test 2. mount /dev/sda -o remount,abort test After commit 014c9caa29d3, remounting a file system using the test mount option "abort" will no longer trigger a panic. This commit will restore the behaviour immediately before commit 014c9caa29d3. (However, note that the Linux kernel's behavior has not been consistent; some previous kernel versions, including 5.4 and 4.19 similarly did not panic after using the mount option "abort".) This also makes a change to long-standing behaviour; namely, the following series commands will now cause a panic, when previously it did not: 1. mount /dev/sda -o ro,errors=panic test 2. echo test > /sys/fs/ext4/sda/trigger_fs_error However, this makes ext4's behaviour much more consistent, so this is a good thing. | |||||
| CVE-2021-46942 | 1 Linux | 1 Linux Kernel | 2024-04-10 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: io_uring: fix shared sqpoll cancellation hangs [ 736.982891] INFO: task iou-sqp-4294:4295 blocked for more than 122 seconds. [ 736.982897] Call Trace: [ 736.982901] schedule+0x68/0xe0 [ 736.982903] io_uring_cancel_sqpoll+0xdb/0x110 [ 736.982908] io_sqpoll_cancel_cb+0x24/0x30 [ 736.982911] io_run_task_work_head+0x28/0x50 [ 736.982913] io_sq_thread+0x4e3/0x720 We call io_uring_cancel_sqpoll() one by one for each ctx either in sq_thread() itself or via task works, and it's intended to cancel all requests of a specified context. However the function uses per-task counters to track the number of inflight requests, so it counts more requests than available via currect io_uring ctx and goes to sleep for them to appear (e.g. from IRQ), that will never happen. Cancel a bit more than before, i.e. all ctxs that share sqpoll and continue to use shared counters. Don't forget that we should not remove ctx from the list before running that task_work sqpoll-cancel, otherwise the function wouldn't be able to find the context and will hang. | |||||
| CVE-2021-46941 | 1 Linux | 1 Linux Kernel | 2024-04-10 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: core: Do core softreset when switch mode According to the programming guide, to switch mode for DRD controller, the driver needs to do the following. To switch from device to host: 1. Reset controller with GCTL.CoreSoftReset 2. Set GCTL.PrtCapDir(host mode) 3. Reset the host with USBCMD.HCRESET 4. Then follow up with the initializing host registers sequence To switch from host to device: 1. Reset controller with GCTL.CoreSoftReset 2. Set GCTL.PrtCapDir(device mode) 3. Reset the device with DCTL.CSftRst 4. Then follow up with the initializing registers sequence Currently we're missing step 1) to do GCTL.CoreSoftReset and step 3) of switching from host to device. John Stult reported a lockup issue seen with HiKey960 platform without these steps[1]. Similar issue is observed with Ferry's testing platform[2]. So, apply the required steps along with some fixes to Yu Chen's and John Stultz's version. The main fixes to their versions are the missing wait for clocks synchronization before clearing GCTL.CoreSoftReset and only apply DCTL.CSftRst when switching from host to device. [1] https://lore.kernel.org/linux-usb/20210108015115.27920-1-john.stultz@linaro.org/ [2] https://lore.kernel.org/linux-usb/0ba7a6ba-e6a7-9cd4-0695-64fc927e01f1@gmail.com/ | |||||
| CVE-2021-46926 | 1 Linux | 1 Linux Kernel | 2024-04-10 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: hda: intel-sdw-acpi: harden detection of controller The existing code currently sets a pointer to an ACPI handle before checking that it's actually a SoundWire controller. This can lead to issues where the graph walk continues and eventually fails, but the pointer was set already. This patch changes the logic so that the information provided to the caller is set when a controller is found. | |||||
| CVE-2021-46922 | 1 Linux | 1 Linux Kernel | 2024-04-10 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: KEYS: trusted: Fix TPM reservation for seal/unseal The original patch 8c657a0590de ("KEYS: trusted: Reserve TPM for seal and unseal operations") was correct on the mailing list: https://lore.kernel.org/linux-integrity/20210128235621.127925-4-jarkko@kernel.org/ But somehow got rebased so that the tpm_try_get_ops() in tpm2_seal_trusted() got lost. This causes an imbalanced put of the TPM ops and causes oopses on TIS based hardware. This fix puts back the lost tpm_try_get_ops() | |||||
| CVE-2021-46920 | 1 Linux | 1 Linux Kernel | 2024-04-10 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Fix clobbering of SWERR overflow bit on writeback Current code blindly writes over the SWERR and the OVERFLOW bits. Write back the bits actually read instead so the driver avoids clobbering the OVERFLOW bit that comes after the register is read. | |||||
| CVE-2021-46918 | 1 Linux | 1 Linux Kernel | 2024-04-10 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: clear MSIX permission entry on shutdown Add disabling/clearing of MSIX permission entries on device shutdown to mirror the enabling of the MSIX entries on probe. Current code left the MSIX enabled and the pasid entries still programmed at device shutdown. | |||||
| CVE-2021-46919 | 1 Linux | 1 Linux Kernel | 2024-04-10 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: fix wq size store permission state WQ size can only be changed when the device is disabled. Current code allows change when device is enabled but wq is disabled. Change the check to detect device state. | |||||
| CVE-2021-46911 | 1 Linux | 1 Linux Kernel | 2024-04-10 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ch_ktls: Fix kernel panic Taking page refcount is not ideal and causes kernel panic sometimes. It's better to take tx_ctx lock for the complete skb transmit, to avoid page cleanup if ACK received in middle. | |||||
| CVE-2021-46913 | 1 Linux | 1 Linux Kernel | 2024-04-10 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nftables: clone set element expression template memcpy() breaks when using connlimit in set elements. Use nft_expr_clone() to initialize the connlimit expression list, otherwise connlimit garbage collector crashes when walking on the list head copy. [ 493.064656] Workqueue: events_power_efficient nft_rhash_gc [nf_tables] [ 493.064685] RIP: 0010:find_or_evict+0x5a/0x90 [nf_conncount] [ 493.064694] Code: 2b 43 40 83 f8 01 77 0d 48 c7 c0 f5 ff ff ff 44 39 63 3c 75 df 83 6d 18 01 48 8b 43 08 48 89 de 48 8b 13 48 8b 3d ee 2f 00 00 <48> 89 42 08 48 89 10 48 b8 00 01 00 00 00 00 ad de 48 89 03 48 83 [ 493.064699] RSP: 0018:ffffc90000417dc0 EFLAGS: 00010297 [ 493.064704] RAX: 0000000000000000 RBX: ffff888134f38410 RCX: 0000000000000000 [ 493.064708] RDX: 0000000000000000 RSI: ffff888134f38410 RDI: ffff888100060cc0 [ 493.064711] RBP: ffff88812ce594a8 R08: ffff888134f38438 R09: 00000000ebb9025c [ 493.064714] R10: ffffffff8219f838 R11: 0000000000000017 R12: 0000000000000001 [ 493.064718] R13: ffffffff82146740 R14: ffff888134f38410 R15: 0000000000000000 [ 493.064721] FS: 0000000000000000(0000) GS:ffff88840e440000(0000) knlGS:0000000000000000 [ 493.064725] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 493.064729] CR2: 0000000000000008 CR3: 00000001330aa002 CR4: 00000000001706e0 [ 493.064733] Call Trace: [ 493.064737] nf_conncount_gc_list+0x8f/0x150 [nf_conncount] [ 493.064746] nft_rhash_gc+0x106/0x390 [nf_tables] | |||||
| CVE-2020-7533 | 1 Schneider-electric | 32 140cpu65260, 140cpu65260 Firmware, 140noc77101 and 29 more | 2024-04-10 | 7.5 HIGH | 9.8 CRITICAL |
| A CWE-255: Credentials Management vulnerability exists in Web Server on Modicon M340, Modicon Quantum and ModiconPremium Legacy offers and their Communication Modules (see security notification for version information) which could cause the execution of commands on the webserver without authentication when sending specially crafted HTTP requests. | |||||
| CVE-2024-23678 | 1 Splunk | 1 Splunk | 2024-04-10 | N/A | 8.8 HIGH |
| In Splunk Enterprise for Windows versions below 9.0.8 and 9.1.3, Splunk Enterprise does not correctly sanitize path input data. This results in the unsafe deserialization of untrusted data from a separate disk partition on the machine. This vulnerability only affects Splunk Enterprise for Windows. | |||||
| CVE-2024-23676 | 1 Splunk | 2 Cloud, Splunk | 2024-04-10 | N/A | 3.5 LOW |
| In Splunk versions below 9.0.8 and 9.1.3, the “mrollup” SPL command lets a low-privileged user view metrics on an index that they do not have permission to view. This vulnerability requires user interaction from a high-privileged user to exploit. | |||||
| CVE-2024-22165 | 1 Splunk | 1 Enterprise Security | 2024-04-10 | N/A | 6.5 MEDIUM |
| In Splunk Enterprise Security (ES) versions lower than 7.1.2, an attacker can create a malformed Investigation to perform a denial of service (DoS). The malformed investigation prevents the generation and rendering of the Investigations manager until it is deleted.<br>The vulnerability requires an authenticated session and access to create an Investigation. It only affects the availability of the Investigations manager, but without the manager, the Investigations functionality becomes unusable for most users. | |||||
| CVE-2023-40594 | 1 Splunk | 2 Splunk, Splunk Cloud Platform | 2024-04-10 | N/A | 7.5 HIGH |
| In Splunk Enterprise versions lower than 8.2.12, 9.0.6, and 9.1.1, an attacker can use the `printf` SPL function to perform a denial of service (DoS) against the Splunk Enterprise instance. | |||||
| CVE-2023-40593 | 1 Splunk | 2 Splunk, Splunk Cloud Platform | 2024-04-10 | N/A | 7.5 HIGH |
| In Splunk Enterprise versions lower than 9.0.6 and 8.2.12, a malicious actor can send a malformed security assertion markup language (SAML) request to the `/saml/acs` REST endpoint which can cause a denial of service through a crash or hang of the Splunk daemon. | |||||
| CVE-2023-32707 | 1 Splunk | 2 Splunk, Splunk Cloud Platform | 2024-04-10 | N/A | 8.8 HIGH |
| In versions of Splunk Enterprise below 9.0.5, 8.2.11, and 8.1.14, and Splunk Cloud Platform below version 9.0.2303.100, a low-privileged user who holds a role that has the ‘edit_user’ capability assigned to it can escalate their privileges to that of the admin user by providing specially crafted web requests. | |||||
| CVE-2023-22941 | 1 Splunk | 2 Splunk, Splunk Cloud Platform | 2024-04-10 | N/A | 7.5 HIGH |
| In Splunk Enterprise versions below 8.1.13, 8.2.10, and 9.0.4, an improperly-formatted ‘INGEST_EVAL’ parameter in a Field Transformation crashes the Splunk daemon (splunkd). | |||||