Total
590 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2024-40060 | 1 Wcharczuk | 1 Go-chart | 2024-07-25 | N/A | 7.5 HIGH |
| go-chart v2.1.1 was discovered to contain an infinite loop via the drawCanvas() function. | |||||
| CVE-2022-48862 | 1 Linux | 1 Linux Kernel | 2024-07-23 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: vhost: fix hung thread due to erroneous iotlb entries In vhost_iotlb_add_range_ctx(), range size can overflow to 0 when start is 0 and last is ULONG_MAX. One instance where it can happen is when userspace sends an IOTLB message with iova=size=uaddr=0 (vhost_process_iotlb_msg). So, an entry with size = 0, start = 0, last = ULONG_MAX ends up in the iotlb. Next time a packet is sent, iotlb_access_ok() loops indefinitely due to that erroneous entry. Call Trace: <TASK> iotlb_access_ok+0x21b/0x3e0 drivers/vhost/vhost.c:1340 vq_meta_prefetch+0xbc/0x280 drivers/vhost/vhost.c:1366 vhost_transport_do_send_pkt+0xe0/0xfd0 drivers/vhost/vsock.c:104 vhost_worker+0x23d/0x3d0 drivers/vhost/vhost.c:372 kthread+0x2e9/0x3a0 kernel/kthread.c:377 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 </TASK> Reported by syzbot at: https://syzkaller.appspot.com/bug?extid=0abd373e2e50d704db87 To fix this, do two things: 1. Return -EINVAL in vhost_chr_write_iter() when userspace asks to map a range with size 0. 2. Fix vhost_iotlb_add_range_ctx() to handle the range [0, ULONG_MAX] by splitting it into two entries. | |||||
| CVE-2024-35328 | 1 Pyyaml | 1 Libyaml | 2024-07-19 | N/A | 7.5 HIGH |
| libyaml v0.2.5 is vulnerable to DDOS. Affected by this issue is the function yaml_parser_parse of the file /src/libyaml/src/parser.c. | |||||
| CVE-2022-48840 | 1 Linux | 1 Linux Kernel | 2024-07-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: iavf: Fix hang during reboot/shutdown Recent commit 974578017fc1 ("iavf: Add waiting so the port is initialized in remove") adds a wait-loop at the beginning of iavf_remove() to ensure that port initialization is finished prior unregistering net device. This causes a regression in reboot/shutdown scenario because in this case callback iavf_shutdown() is called and this callback detaches the device, makes it down if it is running and sets its state to __IAVF_REMOVE. Later shutdown callback of associated PF driver (e.g. ice_shutdown) is called. That callback calls among other things sriov_disable() that calls indirectly iavf_remove() (see stack trace below). As the adapter state is already __IAVF_REMOVE then the mentioned loop is end-less and shutdown process hangs. The patch fixes this by checking adapter's state at the beginning of iavf_remove() and skips the rest of the function if the adapter is already in remove state (shutdown is in progress). Reproducer: 1. Create VF on PF driven by ice or i40e driver 2. Ensure that the VF is bound to iavf driver 3. Reboot [52625.981294] sysrq: SysRq : Show Blocked State [52625.988377] task:reboot state:D stack: 0 pid:17359 ppid: 1 f2 [52625.996732] Call Trace: [52625.999187] __schedule+0x2d1/0x830 [52626.007400] schedule+0x35/0xa0 [52626.010545] schedule_hrtimeout_range_clock+0x83/0x100 [52626.020046] usleep_range+0x5b/0x80 [52626.023540] iavf_remove+0x63/0x5b0 [iavf] [52626.027645] pci_device_remove+0x3b/0xc0 [52626.031572] device_release_driver_internal+0x103/0x1f0 [52626.036805] pci_stop_bus_device+0x72/0xa0 [52626.040904] pci_stop_and_remove_bus_device+0xe/0x20 [52626.045870] pci_iov_remove_virtfn+0xba/0x120 [52626.050232] sriov_disable+0x2f/0xe0 [52626.053813] ice_free_vfs+0x7c/0x340 [ice] [52626.057946] ice_remove+0x220/0x240 [ice] [52626.061967] ice_shutdown+0x16/0x50 [ice] [52626.065987] pci_device_shutdown+0x34/0x60 [52626.070086] device_shutdown+0x165/0x1c5 [52626.074011] kernel_restart+0xe/0x30 [52626.077593] __do_sys_reboot+0x1d2/0x210 [52626.093815] do_syscall_64+0x5b/0x1a0 [52626.097483] entry_SYSCALL_64_after_hwframe+0x65/0xca | |||||
| CVE-2024-36288 | 1 Linux | 1 Linux Kernel | 2024-07-15 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: SUNRPC: Fix loop termination condition in gss_free_in_token_pages() The in_token->pages[] array is not NULL terminated. This results in the following KASAN splat: KASAN: maybe wild-memory-access in range [0x04a2013400000008-0x04a201340000000f] | |||||
| CVE-2024-1931 | 2024-07-05 | N/A | 7.5 HIGH | ||
| NLnet Labs Unbound version 1.18.0 up to and including version 1.19.1 contain a vulnerability that can cause denial of service by a certain code path that can lead to an infinite loop. Unbound 1.18.0 introduced a feature that removes EDE records from responses with size higher than the client's advertised buffer size. Before removing all the EDE records however, it would try to see if trimming the extra text fields on those records would result in an acceptable size while still retaining the EDE codes. Due to an unchecked condition, the code that trims the text of the EDE records could loop indefinitely. This happens when Unbound would reply with attached EDE information on a positive reply and the client's buffer size is smaller than the needed space to include EDE records. The vulnerability can only be triggered when the 'ede: yes' option is used; non default configuration. From version 1.19.2 on, the code is fixed to avoid looping indefinitely. | |||||
| CVE-2024-35982 | 1 Linux | 1 Linux Kernel | 2024-07-03 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: Avoid infinite loop trying to resize local TT If the MTU of one of an attached interface becomes too small to transmit the local translation table then it must be resized to fit inside all fragments (when enabled) or a single packet. But if the MTU becomes too low to transmit even the header + the VLAN specific part then the resizing of the local TT will never succeed. This can for example happen when the usable space is 110 bytes and 11 VLANs are on top of batman-adv. In this case, at least 116 byte would be needed. There will just be an endless spam of batman_adv: batadv0: Forced to purge local tt entries to fit new maximum fragment MTU (110) in the log but the function will never finish. Problem here is that the timeout will be halved all the time and will then stagnate at 0 and therefore never be able to reduce the table even more. There are other scenarios possible with a similar result. The number of BATADV_TT_CLIENT_NOPURGE entries in the local TT can for example be too high to fit inside a packet. Such a scenario can therefore happen also with only a single VLAN + 7 non-purgable addresses - requiring at least 120 bytes. While this should be handled proactively when: * interface with too low MTU is added * VLAN is added * non-purgeable local mac is added * MTU of an attached interface is reduced * fragmentation setting gets disabled (which most likely requires dropping attached interfaces) not all of these scenarios can be prevented because batman-adv is only consuming events without the the possibility to prevent these actions (non-purgable MAC address added, MTU of an attached interface is reduced). It is therefore necessary to also make sure that the code is able to handle also the situations when there were already incompatible system configuration are present. | |||||
| CVE-2024-34489 | 2024-07-03 | N/A | 7.5 HIGH | ||
| OFPHello in parser.py in Faucet SDN Ryu 4.34 allows attackers to cause a denial of service (infinite loop) via length=0. | |||||
| CVE-2024-34488 | 2024-07-03 | N/A | 7.5 HIGH | ||
| OFPMultipartReply in parser.py in Faucet SDN Ryu 4.34 allows attackers to cause a denial of service (infinite loop) via b.length=0. | |||||
| CVE-2023-52726 | 2024-07-03 | N/A | 6.5 MEDIUM | ||
| Open Networking Foundation SD-RAN ONOS onos-ric-sdk-go 0.8.12 allows infinite repetition of the processing of an error (in the Subscribe function implementation for the subscribed indication stream). | |||||
| CVE-2022-48635 | 2024-07-03 | N/A | 6.2 MEDIUM | ||
| In the Linux kernel, the following vulnerability has been resolved: fsdax: Fix infinite loop in dax_iomap_rw() I got an infinite loop and a WARNING report when executing a tail command in virtiofs. WARNING: CPU: 10 PID: 964 at fs/iomap/iter.c:34 iomap_iter+0x3a2/0x3d0 Modules linked in: CPU: 10 PID: 964 Comm: tail Not tainted 5.19.0-rc7 Call Trace: <TASK> dax_iomap_rw+0xea/0x620 ? __this_cpu_preempt_check+0x13/0x20 fuse_dax_read_iter+0x47/0x80 fuse_file_read_iter+0xae/0xd0 new_sync_read+0xfe/0x180 ? 0xffffffff81000000 vfs_read+0x14d/0x1a0 ksys_read+0x6d/0xf0 __x64_sys_read+0x1a/0x20 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd The tail command will call read() with a count of 0. In this case, iomap_iter() will report this WARNING, and always return 1 which casuing the infinite loop in dax_iomap_rw(). Fixing by checking count whether is 0 in dax_iomap_rw(). | |||||
| CVE-2024-36990 | 2024-07-02 | N/A | 6.5 MEDIUM | ||
| In Splunk Enterprise versions below 9.2.2, 9.1.5, and 9.0.10 and Splunk Cloud Platform versions below 9.2.2403.100, an authenticated, low-privileged user that does not hold the admin or power Splunk roles could send a specially crafted HTTP POST request to the datamodel/web REST endpoint in Splunk Enterprise, potentially causing a denial of service. | |||||
| CVE-2023-34966 | 4 Debian, Fedoraproject, Redhat and 1 more | 4 Debian Linux, Fedora, Enterprise Linux and 1 more | 2024-06-25 | N/A | 7.5 HIGH |
| An infinite loop vulnerability was found in Samba's mdssvc RPC service for Spotlight. When parsing Spotlight mdssvc RPC packets sent by the client, the core unmarshalling function sl_unpack_loop() did not validate a field in the network packet that contains the count of elements in an array-like structure. By passing 0 as the count value, the attacked function will run in an endless loop consuming 100% CPU. This flaw allows an attacker to issue a malformed RPC request, triggering an infinite loop, resulting in a denial of service condition. | |||||
| CVE-2022-0778 | 7 Debian, Fedoraproject, Mariadb and 4 more | 15 Debian Linux, Fedora, Mariadb and 12 more | 2024-06-21 | 5.0 MEDIUM | 7.5 HIGH |
| The BN_mod_sqrt() function, which computes a modular square root, contains a bug that can cause it to loop forever for non-prime moduli. Internally this function is used when parsing certificates that contain elliptic curve public keys in compressed form or explicit elliptic curve parameters with a base point encoded in compressed form. It is possible to trigger the infinite loop by crafting a certificate that has invalid explicit curve parameters. Since certificate parsing happens prior to verification of the certificate signature, any process that parses an externally supplied certificate may thus be subject to a denial of service attack. The infinite loop can also be reached when parsing crafted private keys as they can contain explicit elliptic curve parameters. Thus vulnerable situations include: - TLS clients consuming server certificates - TLS servers consuming client certificates - Hosting providers taking certificates or private keys from customers - Certificate authorities parsing certification requests from subscribers - Anything else which parses ASN.1 elliptic curve parameters Also any other applications that use the BN_mod_sqrt() where the attacker can control the parameter values are vulnerable to this DoS issue. In the OpenSSL 1.0.2 version the public key is not parsed during initial parsing of the certificate which makes it slightly harder to trigger the infinite loop. However any operation which requires the public key from the certificate will trigger the infinite loop. In particular the attacker can use a self-signed certificate to trigger the loop during verification of the certificate signature. This issue affects OpenSSL versions 1.0.2, 1.1.1 and 3.0. It was addressed in the releases of 1.1.1n and 3.0.2 on the 15th March 2022. Fixed in OpenSSL 3.0.2 (Affected 3.0.0,3.0.1). Fixed in OpenSSL 1.1.1n (Affected 1.1.1-1.1.1m). Fixed in OpenSSL 1.0.2zd (Affected 1.0.2-1.0.2zc). | |||||
| CVE-2024-6061 | 2024-06-20 | 1.7 LOW | 3.3 LOW | ||
| A vulnerability has been found in GPAC 2.5-DEV-rev228-g11067ea92-master and classified as problematic. Affected by this vulnerability is the function isoffin_process of the file src/filters/isoffin_read.c of the component MP4Box. The manipulation leads to infinite loop. It is possible to launch the attack on the local host. The exploit has been disclosed to the public and may be used. The identifier of the patch is 20c0f29139a82779b86453ce7f68d0681ec7624c. It is recommended to apply a patch to fix this issue. The identifier VDB-268789 was assigned to this vulnerability. | |||||
| CVE-2018-19826 | 1 Sass-lang | 1 Libsass | 2024-06-18 | 4.3 MEDIUM | 6.5 MEDIUM |
| In inspect.cpp in LibSass 3.5.5, a high memory footprint caused by an endless loop (containing a Sass::Inspect::operator()(Sass::String_Quoted*) stack frame) may cause a Denial of Service via crafted sass input files with stray '&' or '/' characters. NOTE: Upstream comments indicate this issue is closed as "won't fix" and "works as intended" by design | |||||
| CVE-2024-5949 | 2024-06-17 | N/A | 4.3 MEDIUM | ||
| Deep Sea Electronics DSE855 Multipart Boundary Infinite Loop Denial-of-Service Vulnerability. This vulnerability allows network-adjacent attackers to create a denial-of-service condition on affected installations of Deep Sea Electronics DSE855 devices. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of multipart boundaries. The issue results from a logic error that can lead to an infinite loop. An attacker can leverage this vulnerability to create a denial-of-service condition on the system. Was ZDI-CAN-23171. | |||||
| CVE-2024-32976 | 1 Envoyproxy | 1 Envoy | 2024-06-12 | N/A | 7.5 HIGH |
| Envoy is a cloud-native, open source edge and service proxy. Envoyproxy with a Brotli filter can get into an endless loop during decompression of Brotli data with extra input. | |||||
| CVE-2024-21408 | 1 Microsoft | 12 Windows 10 1507, Windows 10 1607, Windows 10 1809 and 9 more | 2024-06-11 | N/A | 5.5 MEDIUM |
| Windows Hyper-V Denial of Service Vulnerability | |||||
| CVE-2023-50763 | 2024-06-11 | N/A | 4.9 MEDIUM | ||
| A vulnerability has been identified in SIMATIC CP 1542SP-1 (6GK7542-6UX00-0XE0) (All versions < V2.3), SIMATIC CP 1542SP-1 IRC (6GK7542-6VX00-0XE0) (All versions < V2.3), SIMATIC CP 1543SP-1 (6GK7543-6WX00-0XE0) (All versions < V2.3), SIPLUS ET 200SP CP 1542SP-1 IRC TX RAIL (6AG2542-6VX00-4XE0) (All versions < V2.3), SIPLUS ET 200SP CP 1543SP-1 ISEC (6AG1543-6WX00-7XE0) (All versions < V2.3), SIPLUS ET 200SP CP 1543SP-1 ISEC TX RAIL (6AG2543-6WX00-4XE0) (All versions < V2.3), SIPLUS TIM 1531 IRC (6AG1543-1MX00-7XE0) (All versions < V2.4.8), TIM 1531 IRC (6GK7543-1MX00-0XE0) (All versions < V2.4.8). The web server of affected products, if configured to allow the import of PKCS12 containers, could end up in an infinite loop when processing incomplete certificate chains. This could allow an authenticated remote attacker to create a denial of service condition by importing specially crafted PKCS12 containers. | |||||