Total
1928 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2021-3908 | 2 Cloudflare, Debian | 2 Octorpki, Debian Linux | 2022-08-09 | 5.0 MEDIUM | 7.5 HIGH |
| OctoRPKI does not limit the depth of a certificate chain, allowing for a CA to create children in an ad-hoc fashion, thereby making tree traversal never end. | |||||
| CVE-2021-43173 | 2 Debian, Nlnetlabs | 2 Debian Linux, Routinator | 2022-08-09 | 5.0 MEDIUM | 7.5 HIGH |
| In NLnet Labs Routinator prior to 0.10.2, a validation run can be delayed significantly by an RRDP repository by not answering but slowly drip-feeding bytes to keep the connection alive. This can be used to effectively stall validation. While Routinator has a configurable time-out value for RRDP connections, this time-out was only applied to individual read or write operations rather than the complete request. Thus, if an RRDP repository sends a little bit of data before that time-out expired, it can continuously extend the time it takes for the request to finish. Since validation will only continue once the update of an RRDP repository has concluded, this delay will cause validation to stall, leading to Routinator continuing to serve the old data set or, if in the initial validation run directly after starting, never serve any data at all. | |||||
| CVE-2021-43843 | 1 Jsx-slack Project | 1 Jsx-slack | 2022-08-09 | 5.0 MEDIUM | 7.5 HIGH |
| jsx-slack is a package for building JSON objects for Slack block kit surfaces from JSX. The maintainers found the patch for CVE-2021-43838 in jsx-slack v4.5.1 is insufficient tfor protection from a Regular Expression Denial of Service (ReDoS) attack. If an attacker can put a lot of JSX elements into `<blockquote>` tag _with including multibyte characters_, an internal regular expression for escaping characters may consume an excessive amount of computing resources. v4.5.1 passes the test against ASCII characters but misses the case of multibyte characters. jsx-slack v4.5.2 has updated regular expressions for escaping blockquote characters to prevent catastrophic backtracking. It is also including an updated test case to confirm rendering multiple tags in `<blockquote>` with multibyte characters. | |||||
| CVE-2018-7580 | 1 Philips | 2 Hue, Hue Firmware | 2022-08-06 | 5.0 MEDIUM | 7.5 HIGH |
| Philips Hue is vulnerable to a Denial of Service attack. Sending a SYN flood on port tcp/80 will freeze Philips Hue's hub and it will stop responding. The "hub" will stop operating and be frozen until the flood stops. During the flood, the user won't be able to turn on/off the lights, and all of the hub's functionality will be unresponsive. The cloud service also won't work with the hub. | |||||
| CVE-2021-0202 | 1 Juniper | 17 Ex9200, Junos, Mx10 and 14 more | 2022-08-05 | 5.0 MEDIUM | 7.5 HIGH |
| On Juniper Networks MX Series and EX9200 Series platforms with Trio-based MPC (Modular Port Concentrator) where Integrated Routing and Bridging (IRB) interface is configured and it is mapped to a VPLS instance or a Bridge-Domain, certain network events at Customer Edge (CE) device may cause memory leak in the MPC which can cause an out of memory and MPC restarts. When this issue occurs, there will be temporary traffic interruption until the MPC is restored. An administrator can use the following CLI command to monitor the status of memory usage level of the MPC: user@device> show system resource-monitor fpc FPC Resource Usage Summary Free Heap Mem Watermark : 20 % Free NH Mem Watermark : 20 % Free Filter Mem Watermark : 20 % * - Watermark reached Slot # % Heap Free RTT Average RTT 1 87 PFE # % ENCAP mem Free % NH mem Free % FW mem Free 0 NA 88 99 1 NA 89 99 When the issue is occurring, the value of “% NH mem Free” will go down until the MPC restarts. This issue affects MX Series and EX9200 Series with Trio-based PFEs (Packet Forwarding Engines). Please refer to https://kb.juniper.net/KB25385 for the list of Trio-based PFEs. This issue affects Juniper Networks Junos OS on MX Series, EX9200 Series: 17.3R3-S8; 17.4R3-S2; 18.2R3-S4, 18.2R3-S5; 18.3R3-S2, 18.3R3-S3; 18.4 versions starting from 18.4R3-S1 and later versions prior to 18.4R3-S6; 19.2 versions starting from 19.2R2 and later versions prior to 19.2R3-S1; 19.4 versions starting from 19.4R2 and later versions prior to 19.4R2-S3, 19.4R3; 20.2 versions starting from 20.2R1 and later versions prior to 20.2R1-S3, 20.2R2. This issue does not affect Juniper Networks Junos OS: 18.1, 19.1, 19.3, 20.1. | |||||
| CVE-2021-0215 | 1 Juniper | 1 Junos | 2022-08-05 | 2.9 LOW | 6.5 MEDIUM |
| On Juniper Networks Junos EX series, QFX Series, MX Series and SRX branch series devices, a memory leak occurs every time the 802.1X authenticator port interface flaps which can lead to other processes, such as the pfex process, responsible for packet forwarding, to crash and restart. An administrator can use the following CLI command to monitor the status of memory consumption: user@device> show task memory detail Please refer to https://kb.juniper.net/KB31522 for details. This issue affects Juniper Networks Junos OS: 14.1X53 versions prior to 14.1X53-D54; 15.1X49 versions prior to 15.1X49-D240 ; 15.1X53 versions prior to 15.1X53-D593; 16.1 versions prior to 16.1R7-S8; 17.2 versions prior to 17.2R3-S4; 17.3 versions prior to 17.3R3-S8; 17.4 versions prior to 17.4R2-S11, 17.4R3-S2; 18.1 versions prior to 18.1R3-S10 ; 18.2 versions prior to 18.2R2-S7, 18.2R3-S3; 18.3 versions prior to 18.3R2-S4, 18.3R3-S2; 18.4 versions prior to 18.4R1-S7, 18.4R2-S4, 18.4R3-S2; 19.1 versions prior to 19.1R1-S5, 19.1R2-S2, 19.1R3; 19.2 versions prior to 19.2R1-S5, 19.2R2; 19.3 versions prior to 19.3R2-S3, 19.3R3; 19.4 versions prior to 19.4R1-S2, 19.4R2. This issue does not affect Juniper Networks Junos OS 12.3, 15.1. | |||||
| CVE-2021-20265 | 2 Linux, Oracle | 2 Linux Kernel, Tekelec Platform Distribution | 2022-08-05 | 4.9 MEDIUM | 5.5 MEDIUM |
| A flaw was found in the way memory resources were freed in the unix_stream_recvmsg function in the Linux kernel when a signal was pending. This flaw allows an unprivileged local user to crash the system by exhausting available memory. The highest threat from this vulnerability is to system availability. | |||||
| CVE-2021-20216 | 1 Privoxy | 1 Privoxy | 2022-08-05 | 7.8 HIGH | 7.5 HIGH |
| A flaw was found in Privoxy in versions before 3.0.31. A memory leak that occurs when decompression fails unexpectedly may lead to a denial of service. The highest threat from this vulnerability is to system availability. | |||||
| CVE-2021-20234 | 1 Zeromq | 1 Libzmq | 2022-08-05 | 4.3 MEDIUM | 6.5 MEDIUM |
| An uncontrolled resource consumption (memory leak) flaw was found in the ZeroMQ client in versions before 4.3.3 in src/pipe.cpp. This issue causes a client that connects to multiple malicious or compromised servers to crash. The highest threat from this vulnerability is to system availability. | |||||
| CVE-2021-0230 | 1 Juniper | 27 Junos, Srx100, Srx110 and 24 more | 2022-08-05 | 5.0 MEDIUM | 7.5 HIGH |
| On Juniper Networks SRX Series devices with link aggregation (lag) configured, executing any operation that fetches Aggregated Ethernet (AE) interface statistics, including but not limited to SNMP GET requests, causes a slow kernel memory leak. If all the available memory is consumed, the traffic will be impacted and a reboot might be required. The following log can be seen if this issue happens. /kernel: rt_pfe_veto: Memory over consumed. Op 1 err 12, rtsm_id 0:-1, msg type 72 /kernel: rt_pfe_veto: free kmem_map memory = (20770816) curproc = kmd An administrator can use the following CLI command to monitor the status of memory consumption (ifstat bucket): user@device > show system virtual-memory no-forwarding | match ifstat Type InUse MemUse HighUse Limit Requests Limit Limit Size(s) ifstat 2588977 162708K - 19633958 <<<< user@device > show system virtual-memory no-forwarding | match ifstat Type InUse MemUse HighUse Limit Requests Limit Limit Size(s) ifstat 3021629 189749K - 22914415 <<<< This issue affects Juniper Networks Junos OS on SRX Series: 17.1 versions 17.1R3 and above prior to 17.3R3-S11; 17.4 versions prior to 17.4R3-S5; 18.2 versions prior to 18.2R3-S7, 18.2R3-S8; 18.3 versions prior to 18.3R3-S4; 18.4 versions prior to 18.4R2-S7, 18.4R3-S6; 19.1 versions prior to 19.1R3-S4; 19.2 versions prior to 19.2R1-S6; 19.3 versions prior to 19.3R3-S1; 19.4 versions prior to 19.4R3-S1; 20.1 versions prior to 20.1R2, 20.1R3; 20.2 versions prior to 20.2R2-S2, 20.2R3; 20.3 versions prior to 20.3R1-S2, 20.3R2. This issue does not affect Juniper Networks Junos OS prior to 17.1R3. | |||||
| CVE-2021-0257 | 1 Juniper | 18 Ex9200, Junos, Mx10 and 15 more | 2022-08-05 | 3.3 LOW | 6.5 MEDIUM |
| On Juniper Networks MX Series and EX9200 Series platforms with Trio-based MPCs (Modular Port Concentrators) where Integrated Routing and Bridging (IRB) interfaces are configured and mapped to a VPLS instance or a Bridge-Domain, certain Layer 2 network events at Customer Edge (CE) devices may cause memory leaks in the MPC of Provider Edge (PE) devices which can cause an out of memory condition and MPC restart. When this issue occurs, there will be temporary traffic interruption until the MPC is restored. An administrator can use the following CLI command to monitor the status of memory usage level of the MPC: user@device> show system resource-monitor fpc FPC Resource Usage Summary Free Heap Mem Watermark : 20 % Free NH Mem Watermark : 20 % Free Filter Mem Watermark : 20 % * - Watermark reached Slot # % Heap Free RTT Average RTT 1 87 PFE # % ENCAP mem Free % NH mem Free % FW mem Free 0 NA 88 99 1 NA 89 99 When the issue is occurring, the value of “% NH mem Free” will go down until the MPC restarts. This issue affects MX Series and EX9200 Series with Trio-based PFEs (Packet Forwarding Engines), including MX-MPC1-3D, MX-MPC1E-3D, MX-MPC2-3D, MX-MPC2E-3D, MPC-3D-16XGE, and CHAS-MXxx Series MPCs. No other products or platforms are affected by this issue. This issue affects Juniper Networks Junos OS on MX Series, EX9200 Series: 17.3 versions prior to 17.3R3-S10; 17.4 versions prior to 17.4R3-S3; 18.2 versions prior to 18.2R3-S7; 18.3 versions prior to 18.3R3-S4; 18.4 versions prior to 18.4R3-S6; 19.2 versions prior to 19.2R3-S2; 19.3 versions prior to 19.3R3-S1; 19.4 versions prior to 19.4R2-S2, 19.4R3; 20.2 versions prior to 20.2R1-S3, 20.2R2; 20.3 versions prior to 20.3R1-S1,, 20.3R2. This issue does not affect Juniper Networks Junos OS: 17.3 versions prior to 17.3R3-S8; 17.4 versions prior to 17.4R3-S2; 18.1; 18.2 versions prior to 18.2R3-S4; 18.3 versions prior to 18.3R3-S2; 18.4 versions prior to 18.4R3-S1; 19.1; 19.2 versions prior to 19.2R2; 19.3 versions prior to 19.3R3; 19.4 versions prior to 19.4R2. | |||||
| CVE-2021-20237 | 1 Zeromq | 1 Libzmq | 2022-08-05 | 4.3 MEDIUM | 7.5 HIGH |
| An uncontrolled resource consumption (memory leak) flaw was found in ZeroMQ's src/xpub.cpp in versions before 4.3.3. This flaw allows a remote unauthenticated attacker to send crafted PUB messages that consume excessive memory if the CURVE/ZAP authentication is disabled on the server, causing a denial of service. The highest threat from this vulnerability is to system availability. | |||||
| CVE-2012-0876 | 6 Canonical, Debian, Libexpat Project and 3 more | 11 Ubuntu Linux, Debian Linux, Libexpat and 8 more | 2022-08-05 | 4.3 MEDIUM | N/A |
| The XML parser (xmlparse.c) in expat before 2.1.0 computes hash values without restricting the ability to trigger hash collisions predictably, which allows context-dependent attackers to cause a denial of service (CPU consumption) via an XML file with many identifiers with the same value. | |||||
| CVE-2021-22642 | 1 Ovarro | 15 Tbox Lt2-530, Tbox Lt2-530 Firmware, Tbox Lt2-532 and 12 more | 2022-08-04 | N/A | 7.5 HIGH |
| An attacker could use specially crafted invalid Modbus frames to crash the Ovarro TBox system. | |||||
| CVE-2021-29469 | 1 Redis.js | 1 Redis | 2022-08-03 | 5.0 MEDIUM | 7.5 HIGH |
| Node-redis is a Node.js Redis client. Before version 3.1.1, when a client is in monitoring mode, the regex begin used to detected monitor messages could cause exponential backtracking on some strings. This issue could lead to a denial of service. The issue is patched in version 3.1.1. | |||||
| CVE-2021-29453 | 1 Matrix-media-repo Project | 1 Matrix-media-repo | 2022-08-03 | 4.0 MEDIUM | 6.5 MEDIUM |
| matrix-media-repo is an open-source multi-domain media repository for Matrix. Versions 1.2.6 and earlier of matrix-media-repo do not properly handle malicious images which are crafted to be small in file size, but large in complexity. A malicious user could upload a relatively small image in terms of file size, using particular image formats, which expands to have extremely large dimensions during the process of thumbnailing. The server can be exhausted of memory in the process of trying to load the whole image into memory for thumbnailing, leading to denial of service. Version 1.2.7 has a fix for the vulnerability. | |||||
| CVE-2021-29430 | 1 Matrix | 1 Sydent | 2022-08-03 | 5.0 MEDIUM | 7.5 HIGH |
| Sydent is a reference Matrix identity server. Sydent does not limit the size of requests it receives from HTTP clients. A malicious user could send an HTTP request with a very large body, leading to memory exhaustion and denial of service. Sydent also does not limit response size for requests it makes to remote Matrix homeservers. A malicious homeserver could return a very large response, again leading to memory exhaustion and denial of service. This affects any server which accepts registration requests from untrusted clients. This issue has been patched by releases 89071a1, 0523511, f56eee3. As a workaround request sizes can be limited in an HTTP reverse-proxy. There are no known workarounds for the problem with overlarge responses. | |||||
| CVE-2021-29433 | 1 Matrix | 1 Sydent | 2022-08-02 | 4.0 MEDIUM | 4.3 MEDIUM |
| Sydent is a reference Matrix identity server. In Sydent versions 2.2.0 and prior, sissing input validation of some parameters on the endpoints used to confirm third-party identifiers could cause excessive use of disk space and memory leading to resource exhaustion. A patch for the vulnerability is in version 2.3.0. No workarounds are known to exist. | |||||
| CVE-2022-24294 | 1 Apache | 1 Mxnet | 2022-08-01 | N/A | 7.5 HIGH |
| A regular expression used in Apache MXNet (incubating) is vulnerable to a potential denial-of-service by excessive resource consumption. The bug could be exploited when loading a model in Apache MXNet that has a specially crafted operator name that would cause the regular expression evaluation to use excessive resources to attempt a match. This issue affects Apache MXNet versions prior to 1.9.1. | |||||
| CVE-2021-3822 | 1 Jsoneditoronline | 1 Jsoneditor | 2022-07-29 | 5.0 MEDIUM | 7.5 HIGH |
| jsoneditor is vulnerable to Inefficient Regular Expression Complexity | |||||